Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diffs for 2.8td
diffs for 2.8td
I have 1991 Patrol LWB 2.8TD (EU made). Which diffs do I have and where can I check the ratio?
Re: diffs for 2.8td
majti wrote:I have 1991 Patrol LWB 2.8TD (EU made). Which diffs do I have and where can I check the ratio?
There should be a compliancie plate or something similar under the bonnet, Pop riveted to the fire wall. On there, there is a trans axle code. where it says 'HG46???'. The important bit is the 46. thismeans it is a 4.6ratio. Which is the norm for AU 2.8td's.
THOUGHT FOR THE DAY....
majti wrote:GQ wrote:yup.. 4.6s are definitely in the 2.8
No longer a 2.8 in mine.. now a 4.2 TD with 35s
TOM
Was it difficulte to change to motors? Does it fit nicely or mods are neccessery?
too much of a hassle.
one engine mount doesnt line up, so a plate was made to suit.
Gearbox had one inch spacers in it to raise it
Diff flanges had to be changed around.
Wiring had to be redone
TOM
Who is online
Users browsing this forum: No registered users and 4 guests