Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1 litre valve timing

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

1 litre valve timing

Post by Rhett »

There is two marks in the inside plate for the timing belt. Do I use the top small triangle or large arrow underneath??
Its a wheelbase thing
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Re: 1 litre valve timing

Post by christover1 »

Rhett wrote:There is two marks in the inside plate for the timing belt. Do I use the top small triangle or large arrow underneath??


the marks on the timing gear and the crank gear should be pointing at each other, thats what it said in a manual I read once, I have never used the case markings, tho they should line up, too. make sure no.1 is on compression/firing stroke tdc. Its best to spin engine by hand a couple of times, then recheck alignment..christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 80
Joined: Fri Jul 02, 2004 1:27 pm
Location: Kalgoorlie W.A.

Post by Cluffy »

That one got me too, its the lower mark
...........shedbound.............
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest