Firstly, congrats on a great forum........
I recently purchased a 1984 jackaroo 3 door with a 4cyl motor.........as far as im aware its the original and has clocked a touch over 300,000.
Its not blowing smoke and actually runs excellent, however it lacks grunt and while i havent attempted to tow the boat yet........I suspect its gunna struggle.
So what are my options and what sort of costs are involved with each option???
I am able to do most of the work myself.
Thanks in advance and hope to be arround here for many years to come.
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What do u reccomend.....engine upgrade
Moderator: Moderators
What do u reccomend.....engine upgrade
Go Hard or Go home
No worries...........actually i just did a quick measure and it will be very hard without a major rebuild of the front end........there just isnt enough length.
Think Im limited to V6 or maybe Deisel????
UPdated..........Well I have just done some more research and discover that it is in fact possible to put the straight 6 in.........I have to ring a company tomorrow to discuss adapter kits and what else is required.
Think Im limited to V6 or maybe Deisel????
UPdated..........Well I have just done some more research and discover that it is in fact possible to put the straight 6 in.........I have to ring a company tomorrow to discuss adapter kits and what else is required.
Go Hard or Go home
Hi Topcat, welcome! 
JackEroo World say that they can supply the Holden straight six adapter kits but these are probably already supplied to them via Marks adapters.
http://jackworld.alphalink.com.au/engine_tips.htm
http://www.marks4wd.com/
Not sure but the conversion may only be possible with a full engine and transmission/t-case swapover. ie: straight six mated to a toyota gearbox/t-case.
Noel[/url]
JackEroo World say that they can supply the Holden straight six adapter kits but these are probably already supplied to them via Marks adapters.
http://jackworld.alphalink.com.au/engine_tips.htm
http://www.marks4wd.com/
Not sure but the conversion may only be possible with a full engine and transmission/t-case swapover. ie: straight six mated to a toyota gearbox/t-case.
Noel[/url]
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Thx for that........I will contact Marks and have a chat.
As for Jackaroo World..........I would not reccomend them to anyone.
They are nothing but a bunch of rip off merchants and the service to there customers is non existent.........unless u are preapred to pay for it through the nose.
If you want to ask any sort of question, they charge you $60.00 per hour.
Complete and utter bunch of wankers.
As for Jackaroo World..........I would not reccomend them to anyone.
They are nothing but a bunch of rip off merchants and the service to there customers is non existent.........unless u are preapred to pay for it through the nose.
If you want to ask any sort of question, they charge you $60.00 per hour.
Complete and utter bunch of wankers.
Go Hard or Go home
Thats interesting. I has never dealt with them personally or heard much feedback about them. You obviously know better then...
Still its good that they do provide some free info on their site.
I have also seen Jacks with the straight six conversion for sale in the papers at various times so someone definately does the conversions.
Cheers,
Noel
PS: We used to have some other 1st gen Jack owners on the site (greazy etc) but they seem to have gone awol of late.
Still its good that they do provide some free info on their site.
I have also seen Jacks with the straight six conversion for sale in the papers at various times so someone definately does the conversions.
Cheers,
Noel
PS: We used to have some other 1st gen Jack owners on the site (greazy etc) but they seem to have gone awol of late.
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Excellent........would love to meet up with some, thats for sure.
I was looking through the Owners handbook and was shocked to find that there was a heap of info about the original owners........sold to a couple in Bathurst (One of my favourite places in the world) and it does in fact still have the original motor in it..........309,000 klms later and still starts first time every time and also still no smoke which really amazes me.
Very little to no rust and seems to be a very sound vehicle all round.
It does have a new roof courtesy of the big hail storm a few years back but otherwise its original.
It actually looks pretty much brand new maybe a year out of its box.........lol
Re Jack world......yeah I was impressed with the site also and it is good they give a few free tips........so graciuous of them.
Love ur part of the world also.........went there some 25 years ago in a mini van with a couyple of mates and had a ball............hope to be back there soon.
I was looking through the Owners handbook and was shocked to find that there was a heap of info about the original owners........sold to a couple in Bathurst (One of my favourite places in the world) and it does in fact still have the original motor in it..........309,000 klms later and still starts first time every time and also still no smoke which really amazes me.
Very little to no rust and seems to be a very sound vehicle all round.
It does have a new roof courtesy of the big hail storm a few years back but otherwise its original.
It actually looks pretty much brand new maybe a year out of its box.........lol
Re Jack world......yeah I was impressed with the site also and it is good they give a few free tips........so graciuous of them.
Love ur part of the world also.........went there some 25 years ago in a mini van with a couyple of mates and had a ball............hope to be back there soon.
Go Hard or Go home
Go diesel!!!! A Rodeo 2.8 or Jack 3.1. Early diesel are boat anchors and tend to go BANG with very little effort. The 3.1 would be my pick....
Or if petrol is what your after, a 3.8 Commo V6 would be good. They seem to be bolted into everything else...
Or if petrol is what your after, a 3.8 Commo V6 would be good. They seem to be bolted into everything else...
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
How about a Turbo VL Commodore conversion...
http://www.hotbite.com.au/content/forum_data/viewtopic.php?p=6724#6724
Noel
http://www.hotbite.com.au/content/forum_data/viewtopic.php?p=6724#6724
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Who is online
Users browsing this forum: No registered users and 0 guests