Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oils

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 140
Joined: Sun Nov 07, 2004 10:23 am
Location: Eastside Vic

oils

Post by Goutman »

Just curious to know what the correct oils to run in the standard 82 rangerover 4speed gearbox an transfer....
Top
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Contact:
Contact swamp

oils

Post by swamp »

LT95 garbox and transfer case , use 20w50 engine oil . Some people say to use gear oil in the main gear box but evidently the internal oil pump finds gear oil to thick to pump.The transfer case had some problems with lubrication and I was told that instead of engineering solutions LR changed the oil grade from 20w50 to gear oil 80w90.Although I still run 20w50 in both as the internal oil seal does not have along life and oil drains from the main box to the transfer case,that is set lower,there is a fix for this
(tap a return line at the appropriate filler levels of both boxes)
regards
Michael
out of my mind, back soon.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

LT95 and LT77 use fibre gears in the oil pump. These can fail if the oil viscosity is too high.
John
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest