Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff info wanted

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Diff info wanted

Post by duncan »

Ok what ratios are in what model and year hilux diffs .Looking for 4.8s what do i get them out of and are hilux centers interchangeable ie front to rear also can a center out of a early modle fit a late model.At what year or model do the pinion flanges change.
Dose anyone no if Hiace diff centers will fit hilux housing and axles and is it true that some hiaces come with 5.2 gearing if so what model
Lastly what different lenghts do tail shafts come in front and rear all this is going into a suki thanks
Duncan
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

4.8:1 rario came out in the early petrol 4wd Hilux's (round headlight)
Yes hiace van diff came out in 5.29:1 (1800 petrol twin round heaflight)
I'm pretty sure that other hiace vans had em too.
They are all interchangable. The only modification you have to do with the early (corse spline pinion) hiace diffs is redrill the pinion flange. Easy to do just line up the drive shaft on the pinion flange - they have a locator - and drill away. :D
Slap on 35's and go nuts :D :D
Where the f#@k did that come from
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Thanks very much i think you just saved me $1200 because i now dont have to by transfercase gears
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Any time dude. Just a note........... I'm running 5.29's with 35 Creepies and an putting in a second transfere to get lower gears. The diffs by themselves are good but I'm into rock crawling and they are not low enough for me :D :D
Where the f#@k did that come from
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Will have to check it out with the zuk guys as to what are standard gearbox and transfercase ratios or do transfercase as well but that alone is a 120% reduction not like the 86 i got on my GQ
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

what are the ratio's of mine? (1993 diesel dual cab LN106 with a 2.8 3L)
indubitably
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

De-lux
Posted: Mon Nov 08, 2004 1:12 am

--------------------------------------------------------------------------------

what are the ratio's of mine? (1993 diesel dual cab LN106 with a 2.8 3L)


Probably 4.3:1, could be wrong though :D
Where the f#@k did that come from
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

well 86 model ln65 has 4.5's
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests