Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn heading for a hard landing

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

warn heading for a hard landing

Post by aloa9061 »

i bought a new 9000lb warn last year and it shat itself last month in warrenty. i get a call from warn. they will not cover any damage under warrenty as it has been in water. this is bullshit for 4wd winch to not be allowed under water. they said sorry and when ii asked if it could be fixed by someone else they said sure but the parts quoted were close to 2 grand. they said that if i bought another one from them it would be 1600 and their new water resistant one. :bad-words:
( i guess if it rains)

i called brawn. got a great lady on the phone. they are going to set me up with a more powerful and faster winch with plasma rope for less than warns offer.

warn is riding on their name and is going to have a hard fall oneday.

i'll let you know how the brawn goes
Last edited by aloa9061 on Wed Nov 10, 2004 5:30 pm, edited 2 times in total.
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Re: warn heading for a har dlanding

Post by ToNkA »

aloa9061 wrote:i bought a new 900lb warn last year


There's your problem. 900lbs winch would't pull a shopping trolley over lino. ;)
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Re: warn heading for a har dlanding

Post by Timmy »

ToNkA wrote:
aloa9061 wrote:i bought a new 900lb warn last year


There's your problem. 900lbs winch would't pull a shopping trolley over lino. ;)


lol
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

warn

Post by aloa9061 »

lol

yeah not impressed

:bad-words:

that is 9000lb
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

You should pm Lockee from this forum as he works for ateco and may be able to help
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

defender kev wrote:You should pm Lockee from this forum as he works for ateco and may be able to help


But IMHO he shouldn't have to do that...
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

If its so bad sell it to me for $100.00
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

winch

Post by aloa9061 »

tell you what make it 500 annd its yours
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

Had the same thing happen to me a couple of years ago

Warn 9000lb low mount got some water in it and ceased the motor and corroded the gears which looked shitty and cheap anyway It was less than a year old - No warranty these things dont like water

I got a warn hi mount 8000 with the motor up higher and a better gearbox design and no issues after 2yrs

Thats now been sold to a happy new purchaser

The old 9000 low mount was a bin job That was one dear learning experience
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Re: winch

Post by Daisy »

aloa9061 wrote:tell you what make it 500 annd its yours


250 and i pay postage

TOM
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

500

Post by aloa9061 »

$500
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

500

Post by aloa9061 »

woops Tonka.

I really don't think it could be as bad as they are saying but i have absolutely no idea how to fix myself or the contacts
Last edited by aloa9061 on Wed Nov 10, 2004 8:06 pm, edited 1 time in total.
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Re: 500

Post by Daisy »

aloa9061 wrote:$500


pass...
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

A manufacturer wont warrant anything against water damage. If you dump your new fourby into a river & it sucks water into the diffs then they wont cover it for water damage. If this happens then the oil should be changed immediately not a week or two after the fact.

Check the warranty booklet it will more than likely say it is not built for use under water.

If it was my winch I would have had it serviced immediately after a drowning to reduce the likelyhood of damage.

Most warranties are limited & only cover failures due to poor workmanship.
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

What mkpatrol said, you breaky, you fixey. :D
KRiS
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

winch

Post by DR Frankenstine »

I have a 9000lb warn and it gets submerged all the time. ive used it under mud and water as well. If you give them a run to dry out the water(as reccomended by the manufacturer) and service the gearbox( instead of leaving it full of water). They will last for years.


GET OVER IT



I bet his brawn will last because he would have learnt his lesson from the warn
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

Brawn gives a two year guarantee on their waterproof winches. I have had mine for over two years and it is the first winch I haven't had to regularly rebuild.
Brawn gets a stack of customers who sell their warns second hand and for a few hundred bucks, trade up to a brand new water proof job.
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

Re: winch

Post by aloa9061 »

DR Frankenstine wrote:I have a 9000lb warn and it gets submerged all the time. ive used it under mud and water as well. If you give them a run to dry out the water(as reccomended by the manufacturer) and service the gearbox( instead of leaving it full of water). They will last for years.


GET OVER IT



I bet his brawn will last because he would have learnt his lesson from the warn


thanks for the advice :finger:
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 1845
Joined: Sat Sep 06, 2003 8:55 pm
Location: mental house

Post by patrolman »

mkpatrol wrote:A manufacturer wont warrant anything against water damage.



not always true, my old man sucked water into his transmission and diffs on his patrol about 6months after he brought and took it back to nissan and said fixed it and they did no questions asked :D
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

I did the same and LR covered it. They said that they are designed for 4WDing - but next time cool it off before punging.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

patrolman wrote:
mkpatrol wrote:A manufacturer wont warrant anything against water damage.



not always true, my old man sucked water into his transmission and diffs on his patrol about 6months after he brought and took it back to nissan and said fixed it and they did no questions asked :D



Ahh yes but did he tell them what he did with it? :D
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

I'd say if the manafacture provides a fording(spelling?) depth over the level of the axles they should be covered under warranty if they suck in water while doing a water crossing.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

stuee wrote:I'd say if the manafacture provides a fording(spelling?) depth over the level of the axles they should be covered under warranty if they suck in water while doing a water crossing.



Not neccesarily, there is usually a clause in the warranty booklet covering them for vehicle abuse & while the vehicle may be a 4WD, dumping it the dirtiest mudhole and bogging it to the shithouse may be considered outside the realms of its "intended use".

It would also depend on their definition of fording. They may only warrant the vehicle until it gets stuck ( bow wave effect ).

Im not saying its right Im just saying this happens.
Posts: 2732
Joined: Fri May 28, 2004 11:50 pm
Location: Perth, WA

Post by stuee »

Yeh thats fair reasoning. Looking at it from a manafactures point of view theres really no way of telling how the vehicle has been used provided the person trying to make the claim was smart enough to clean the vehicle firts ;) .
Posts: 124
Joined: Sat Oct 23, 2004 6:41 pm

Post by p76rangie »

You just have to be careful in regard to the actual pulling power of the winch. The Brawn 9500 has up to 30% less pulling power than the Warn 9500 and the Brawn is slower. The Warn with 3 layers on the drum will still pull 7,920 lb while the Brawn will only pull 6,500, with 4 layers the Brawn will only pull 5700 lb while the Warn will pull 7400. At 6,000 lb and 9,500lb the Brawn is abour 20% slower.

You get what you pay for.
Posts: 3
Joined: Tue May 25, 2004 9:10 pm
Location: Dandenong Vic

Post by dieseltojo »

I had a warn 10000 Lb winch on my 4by for 15 years ,crossed a hundred rivers including the brackish Jardine at the top end.Then it was serviced by ARB at the new Dandenong branch for$ 250-00.It was ready for another 15 years Work.It is important to run out the cable after every trip and rewind it on the drum while pulling the vehicle.This heats the motor and dries out he water.Then again maybe I was lucky.Regards P.K.
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

My 9000lb low mount warn is about 6 years old, never been opened for any reason, so never had a service/clean and it has been used under water/mud a number of times and it is still going strong.
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

As I said before, in any test conducted by 4wd TV, Brawn and 4x4 Australia magazine the Brawn has continuously pulled to 12,500-13,000lbs whilst no Warn has ever reached it's rated capacity. This is because of the rating system...as stated by Warn tech staff in the US...pulling a load up a ramp, if it can pull it for 2 metres before stalling - it is called that rating, and that is in a lab with max voltage, amps, etc.

The Brawns are rated on a dead pull and 9,500 is a safe working CONTINUOUS load...it will pull that all day...not just for 2 metres.

Furthermore in the 4x4 Australia endurance test (half load for 4 minutes)...the Brawn motor was warm but touchable, the others were too hot to touch but still pulled efficiently BUT the Warn was smoking so badly after 2 minutes that it had to be switched off.

YES the Brawn is slower but it will pull harder, longer and more efficiently...even at no load it is drawing 10 amps less than a Warn.

PLUS the Brawn is guaranteed waterproof whereas all of the Warns (except the new water proof one...How much $$$$) is guaranteed to not work under water (infact the Warn brochures have only changed recently as in removing the red comments on every third or fourth page - "do not submerge these winches". Which obviously voids their warranty...the purpose of this thread!).
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 52
Joined: Tue Aug 31, 2004 10:57 am
Location: Sydney

warn heading for a hard landing

Post by aloa9061 »

according to warn theiir new water resistant winch is 2400 and i stress resistant.

maybe i was unlucky?
99 300tdi Defender
33" muddies 2"lift
Bilstein shocks, lowells springs
Rear maxi axles and AIR Locker
Lightforce spotties
tx3200, Big red +air tank
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

was yours the water 'resistant one' or just the standard piece of US metal?
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Post Reply

Who is online

Users browsing this forum: No registered users and 163 guests