Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

no patrols over here so i need some help...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

no patrols over here so i need some help...

Post by zeeto »

alright i found out today that later model patrols came stock with 3.76:1 in the tcase. this caught my interest because patrols are passenger side drop, opposite of my dd pathfinder. reason why it is of interest to me is because my original plan was to swap fj-80s for my 8"s in my yota. the next idea was to put them under my path, by going vg33->tranny adaptor->700r4a->tcase adaptor->yota tcase->dual case adaptor->yota dual case->axles, to switch over to passengers side drop. but 3 adaptors, one custom, is 1k+ in adaptors, and a lot of adaptor as it is.
knowing about this case changes things. so my question to you guys, since there hardly any patrols around here, is i'd like to find out more info on the engine/tranny combos available and see if there is a tranny/tcase from a patrol that bolts up to my vg33, if not i'll have to fab an adaptor. simple, simple swap if that's possible, relatively speaking :twisted:
thanks a lot
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Nah. Aftermarket gears come in 3.74 or 3.63(?). The stock ratio is ~1.97 or 2.02 or therabouts..
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

lol, well that idea was shot down quick, thanks for clearing that up though

how much do you guys pay for the aftermarket gears? and is there a dual case adaptor for them?
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

And I don't know about bolting up to your engine, but a patrol tranny/t-case combo is a Fawking huge peice of machinery and probably won't even come close to fitting in your truck...
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Gears are around $1300 AU. A dude from Sasquatch Engineering will be on here in a few hours to answer your question on the dual case adaptor. But you have to ring him up and talk to him for 41 minutes exactly. :D

(the phone call thing is a stupid in-joke) :silly:
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

:lol: i was about to say, that'll be like a $50 phone call for me.

how much do the patrol tcases themselves weigh?
about how much larger is the patrol tranny/tcase compared to a terrano combo?
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

zeeto wrote::lol: i was about to say, that'll be like a $50 phone call for me.

how much do the patrol tcases themselves weigh?
about how much larger is the patrol tranny/tcase compared to a terrano combo?


It was a $12 phone call for me and was the subject of much debate :twisted:

Don't know actual weight, but the size and weight would be easily half again as big as the toyota pick-up stuff.
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

i used to own a terrano and its gearbox and transfer is tiny compared to the patrol.

you have some crazy ideas. hope they work out. too much of a headfawk for me to think about at the moment. :crazyeyes:
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

Wendle wrote:Don't know actual weight, but the size and weight would be easily half again as big as the toyota pick-up stuff.


i was actually planning on trying to make a dual case adaptor for pathfinders until i stumbled onto the patrol stuff.
so the patrol stuff is smaller than yota pickup stuff? am i understanding that right? because my yota tcase is smaller than my pathfinder tcase.
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

N*A*M wrote:i used to own a terrano and its gearbox and transfer is tiny compared to the patrol.

you have some crazy ideas. hope they work out. too much of a headfawk for me to think about at the moment. :crazyeyes:


oh ok that cleared it up, thanks...
but when there's no options for your nissan you have to think up stupid chit, and after buying my yota i wanna throw yota under my nissan. hey i think it's better than throwing jeep or ford stuff under there :twisted:
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

N*A*M wrote:i used to own a terrano and its gearbox and transfer is tiny compared to the patrol.

you have some crazy ideas. hope they work out. too much of a headfawk for me to think about at the moment. :crazyeyes:



so it was YOU that bought the terrano in australia

didnt they only sell 1 ?

:D
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

zeeto wrote:
Wendle wrote:Don't know actual weight, but the size and weight would be easily half again as big as the toyota pick-up stuff.


i was actually planning on trying to make a dual case adaptor for pathfinders until i stumbled onto the patrol stuff.
so the patrol stuff is smaller than yota pickup stuff? am i understanding that right? because my yota tcase is smaller than my pathfinder tcase.


nah, half AGAIN as big, if not more. So nearly twice as big! FAWKING HUGE KINDA.. :shock: :D
Posts: 283
Joined: Fri Nov 01, 2002 1:16 pm
Location: Rowville, VIC

Post by .MYTLUX. »

he is in the US, it will be a pathfider.
Blair,

90 2.8D HILUX s/c
33" BFG m/t
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

Wendle wrote:
zeeto wrote:
Wendle wrote:Don't know actual weight, but the size and weight would be easily half again as big as the toyota pick-up stuff.


i was actually planning on trying to make a dual case adaptor for pathfinders until i stumbled onto the patrol stuff.
so the patrol stuff is smaller than yota pickup stuff? am i understanding that right? because my yota tcase is smaller than my pathfinder tcase.


nah, half AGAIN as big, if not more. So nearly twice as big! FAWKING HUGE KINDA.. :shock: :D


i've never heard someone say it like that, i come on here to find out about patrol stuff and i learn something else :lol:
last question for the night, since it's 1am over here, how strong are the patrol cases? compared to something like a yota pickup or terrano case? now i've got other ideas floating through my head
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Pretty strong. These are really overweight trucks with big torquey deisels often used for towing horses, boats, caravans, wildebeest etc, and transmission problems are pretty rare..
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

the patrol drive train is bullet proof

tuff as...

although i just rebuilt my tcase when the rockhopper went in as the input and output bearing were worn
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

terrano and pathfinder (code #D21) same car same running gear different engine (TD vs VG respectively)

wow they actually sold 1 here? :finger:
got the terrano straight from japan private import

terrano 2 = puke ugly

i have heard quite a few guys just run dana 44s in the front from an early wagoneer (i think that's the one that had passenger side pinion). yeah it's not japanese but it's the best option. also i have not heard of gearbox & transfer case failure from the pathy nor the patrol.
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

100's of GU2 gearbox failures in aust

i've done 2 :D

5th gear strips the splines off the mainshaft due to load with the huge torque of the 3.0 and 4.2 TD

new mainshaft and 5th gear cluster is 12mm wider, GU3 got the new part (spet 2002) and 1st newstyle mainshaft as a spare part was in june 2002 (went in my car) :D
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

my tranny is shot, and a couple of my buddies are going too. it seems to be hit or miss with them over here though.
yeah you guys got the better engine...

the d44 is a option, but, i'm left without any respectable gearing options keeping it drivers side. there's nothing for wd21s in that respect. by going passenger side and i can put in yota gearing, and i just gearing my yota with duals and 4.7 in the back for ~$700. the path finally got it's first option the other day when a company released 3.92:1s for $1300 US ($2115 AUS).
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

zeeto wrote:
Wendle wrote:
zeeto wrote:
Wendle wrote:Don't know actual weight, but the size and weight would be easily half again as big as the toyota pick-up stuff.


i was actually planning on trying to make a dual case adaptor for pathfinders until i stumbled onto the patrol stuff.
so the patrol stuff is smaller than yota pickup stuff? am i understanding that right? because my yota tcase is smaller than my pathfinder tcase.


nah, half AGAIN as big, if not more. So nearly twice as big! FAWKING HUGE KINDA.. :shock: :D


i've never heard someone say it like that, i come on here to find out about patrol stuff and i learn something else :lol:
last question for the night, since it's 1am over here, how strong are the patrol cases? compared to something like a yota pickup or terrano case? now i've got other ideas floating through my head


Ask Cheezy how strong a Patrol driveline is :shock: :shock:
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

zeeto, check out
www.marks4wd.com for all sorts of adaptors.
i have a marks low range set in my patrol.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

thanks for the link big red...i'll have to shoot them an email and pick their brains a little
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

roly wrote:100's of GU2 gearbox failures in aust

i've done 2 :D

5th gear strips the splines off the mainshaft due to load with the huge torque of the 3.0 and 4.2 TD

new mainshaft and 5th gear cluster is 12mm wider, GU3 got the new part (spet 2002) and 1st newstyle mainshaft as a spare part was in june 2002 (went in my car) :D


I don't understand this. Why 5th gear? there is less torque going through to the t-case in 5th than any other gear.. What does it do, strip the splines of the shaft, or strip the gears?? The shaft is 50mm dia :shock:
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

wendle

its puts lots of pressure on the splines, also towing in 5th kills it early.

when mine came out your could spin the 5th gear cluster around on the mainshaft

basically it wears the splines out until they are no longer in mesh with the gear.
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

aaahhh, sorry, gearbox failure, I was still thinking t/case... Now I understand :crazyeyes:
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Wendle wrote:aaahhh, sorry, gearbox failure, I was still thinking t/case... Now I understand :crazyeyes:


i thought this is where you went wrong, and i thought, GEEZ he looks like a right stoner now

ROFL
hands and mums dont count!!!
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

I am the stoner who spent two weeks trying to set the end float on a t/case with the wrong bearing in it. 8)
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Wendle wrote:I am the stoner who spent two weeks trying to set the end float on a t/case with the wrong bearing in it. 8)


end float: when a boat sinks, anything sinking, i.e. not floating, noun, descr (abbrev.)

ROFL

i hav a fully floating VW bug!
hands and mums dont count!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests