Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Another 40 on the road
Moderators: toaddog, Elmo, DUDELUX
Another 40 on the road
Hey all, just had to teel some one that after 4 months my BJ42 is on the road and registered . I'm just so excited to be driving a cruiser again i had to tell someone.
Now to go get it dirty someware
Now to go get it dirty someware
1982 BJ42, Turbo, Roberts Air locker, 33" MT-117 xtremes.
Re: Another 40 on the road
Swifty wrote:Hey all, just had to teel some one that after 4 months my BJ42 is on the road and registered . I'm just so excited to be driving a cruiser again i had to tell someone.
Now to go get it dirty someware
ANOTHER 40
ANOTHER BJ
www.3rdrock4x4.com
Re: Another 40 on the road
scotto wrote:
ANOTHER BJ
One of us, One of us, One of us, One of us, One of us,
ONLY USE IT IN HIGH RANGE 3RD & 4TH!
I had one and had 2 probs with it during about 5 years
1. crunched bad in and out of gear = syncro fixed cheapishly
2. got jammed in OD and could not disengage = rooted couldn't afford to fix it. gutted.
Apparently under the 'high torque loads' (in a BJ??? ) you got to be careful as the OD units arent really thaaaat strong and reckon should NOT use in low range or 1st and 2nd, tempting and wonderful as it is.
If it is poppsing out of gear then hopefully it would be a minor fix but would go easy on it and see what happens when you treat it good . I gave mine a fair hammering and would not be surprised if thats what killed it
I had one and had 2 probs with it during about 5 years
1. crunched bad in and out of gear = syncro fixed cheapishly
2. got jammed in OD and could not disengage = rooted couldn't afford to fix it. gutted.
Apparently under the 'high torque loads' (in a BJ??? ) you got to be careful as the OD units arent really thaaaat strong and reckon should NOT use in low range or 1st and 2nd, tempting and wonderful as it is.
If it is poppsing out of gear then hopefully it would be a minor fix but would go easy on it and see what happens when you treat it good . I gave mine a fair hammering and would not be surprised if thats what killed it
www.3rdrock4x4.com
Im here for the sausage!
t
Damn you BJ owners are getting technological...overdrives!!!
good to see the avatar up mate. was wondering what it actually looked like that gives a pretty fair indication.
welcome....
good to see the avatar up mate. was wondering what it actually looked like that gives a pretty fair indication.
welcome....
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Who is online
Users browsing this forum: No registered users and 1 guest