Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Beefing up IFS
Moderators: toaddog, Elmo, DUDELUX
Beefing up IFS
Ok, so i've gone IFS and not regretting it, and it seems to be ample for moderate off roading, and better for my highway driving, but i want to know what i can do to stregnthen and maybe give it a bit more travel it for when i am out on the hard offroad tracks.
EDIT: Rather then start a new topic, i'll include this question. i will probably need new set of tyres in a couple of months, and i'm running a 2.4 diesel. should i stick with 31's, or get 32's or 33's. what i'm worried about is how well the little diesel will be able to push bigger tyres
EDIT: Rather then start a new topic, i'll include this question. i will probably need new set of tyres in a couple of months, and i'm running a 2.4 diesel. should i stick with 31's, or get 32's or 33's. what i'm worried about is how well the little diesel will be able to push bigger tyres
Last edited by alrob on Mon Nov 08, 2004 9:59 am, edited 2 times in total.
Re: Beefing up IFS
alrob wrote:Ok, so i've gone IFS and not regretting it, and it seems to be ample for moderate off roading, and better for my highway driving, but i want to know what i can do to stregnthen and maybe give it a bit more travel it for when i am out on the hard offroad tracks.
SAS
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Re: Beefing up IFS
ToNkA wrote:alrob wrote:Ok, so i've gone IFS and not regretting it, and it seems to be ample for moderate off roading, and better for my highway driving, but i want to know what i can do to stregnthen and maybe give it a bit more travel it for when i am out on the hard offroad tracks.
SAS
well, apart from offloading the 3 grand for an SAS! lol
ive got an ifs too, there is absolutely nothing you can do to to get any real increase in wheel travel, you can lift them a couple of inches, and you can cut down the bumpstops to gain about an inch more travel, im going to take the gas axe to my ifs and convert it to a solid axle set up wih leaf springs, ifs diffs are also weak as piss, ive blown 4 of em.
It's easy to get more droop from an IFS setup... install some top ball joint spacers. You can get 25mm thick (or thicker) aluminium, cut it to suit, and stick 'em in between the top wishbone and ball joint. Therefore for the same ride height, you can back off the torsion bars, which with cut bumpstops, will give you anywhere from 1-2" more droop.
Have a look at the Techsite section of the Toyota Surf forum, www.toyotasurf.asn.au which explains how to do it.
Cheers,
Pat
Have a look at the Techsite section of the Toyota Surf forum, www.toyotasurf.asn.au which explains how to do it.
Cheers,
Pat
BIG.PAT
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!
More to come when the $$$$ sum.....
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!
More to come when the $$$$ sum.....
ive done this modification with the ball joint spacers, you have to put spacers under the diff too for it to work, its still not a big increase in wheel travelbigpat wrote:It's easy to get more droop from an IFS setup... install some top ball joint spacers. You can get 25mm thick (or thicker) aluminium, cut it to suit, and stick 'em in between the top wishbone and ball joint. Therefore for the same ride height, you can back off the torsion bars, which with cut bumpstops, will give you anywhere from 1-2" more droop.
Have a look at the Techsite section of the Toyota Surf forum, www.toyotasurf.asn.au which explains how to do it.
Cheers,
Pat
I did all these mods too and ran 35's on my Surf and got good wheel travel but in the end the only way to keep the treads on the ground was to get CHEEZY to SAS me up
It's a beautifull thing and who cares about the cost ...... start a SAS fund and start saving
Cheers
Andrew
It's a beautifull thing and who cares about the cost ...... start a SAS fund and start saving
Cheers
Andrew
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Andrew
----------------------
Just a few mods, nothing over the top.:)
Who is online
Users browsing this forum: No registered users and 0 guests