Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3" inch lift.....Do I need to extend brake lines???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

3" inch lift.....Do I need to extend brake lines???

Post by Chookman »

Have lifted my 89 LWB GQ to approx 3 inches.
Do In need to extend my brake lines??
What is the approx cost if I do??

Thanks
Chook
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: 3" inch lift.....Do I need to extend brake lines???

Post by turps »

Chookman wrote:Have lifted my 89 LWB GQ to approx 3 inches.
Do In need to extend my brake lines??
What is the approx cost if I do??

Thanks
Chook


Not sure if you will need new ones or not. But if you do, a cheap fix is put the rears on the front (I may have this arse about). And buy a new one for the other end. Last time I prcied them they where $30 for rubber or $60 for braided S/S.
THOUGHT FOR THE DAY....
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Re: 3" inch lift.....Do I need to extend brake lines???

Post by bagsy »

Chookman wrote:Have lifted my 89 LWB GQ to approx 3 inches.
Do In need to extend my brake lines??
What is the approx cost if I do??

Thanks
Chook


Im running 3 inch dobinsons and all i did was undo the bolt that hols the line to th diff and gently bend it up about 1 inch and made a bracket to hold it there. this is on a lwb gq and works fine. Shane.....
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Re: 3" inch lift.....Do I need to extend brake lines???

Post by Chookman »

bagsy wrote:
Im running 3 inch dobinsons and all i did was undo the bolt that hols the line to th diff and gently bend it up about 1 inch and made a bracket to hold it there. this is on a lwb gq and works fine. Shane.....


Thanks Bagsy

Why didn't I think of that

Chook
Posts: 52
Joined: Sun Apr 25, 2004 7:01 pm
Location: tamworth nsw

Post by nischev »

I lifted our 97 Gq lwb 3" and what i did on the front was unbolted the bracket that holds the flexible line up the top and extended it 1 1/2" then put it all back together. Saves running the risk of getting something stuck between the diff and brake line and ending up with no brakes. Going to do the same on the back but havnt managed to pull it yet. There is plenty of the metal line there to allow this mod.
madness
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

yes must be replaced, also springs and shocks to a decent height!!!!!

A DOT attracting height of 6 inches will do....... Time to get serious...

Trust me sooner or later you will upgrade,,,, might aswell do now

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Post by Chookman »

Bingham wrote:A DOT attracting height of 6 inches will do....... Time to get serious...

Trust me sooner or later you will upgrade,,,, might aswell do now

Bingham


Have already looked at some 6" springs....only problem is the truck won't fit in the garage. :cry:
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

simply cut out concrete base or lift roof! dedication starts here :lol: :lol: :lol: :lol: :lol: :lol: :lol:
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

:rofl: :rofl: :rofl:
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

I run Dobinson 3.5 inch heavy duty Gu fronts and same GQ rears in my 97LWB wagon with 30mm spring packers.

I don't need new diff breathers or brakelines as mine all reach. Even at full flex, and it flexes really well too.
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

I did a 2" lift and noticed the front brake line stretched when on the hoist.

I got a new one made up, I think it was $50 or so.
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

dieseldude wrote:I run Dobinson 3.5 inch heavy duty Gu fronts and same GQ rears in my 97LWB wagon with 30mm spring packers.

I don't need new diff breathers or brakelines as mine all reach. Even at full flex, and it flexes really well too.


so with 4.5 inches of lift your breathers and brake lines are long enough !! :shock:

I think the first time both front wheels come off the ground at the same time ,as in lauching up a steep hill... You might find you have no front brakes ...... Just a tip .
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

bagsy wrote:
dieseldude wrote:I run Dobinson 3.5 inch heavy duty Gu fronts and same GQ rears in my 97LWB wagon with 30mm spring packers.

I don't need new diff breathers or brakelines as mine all reach. Even at full flex, and it flexes really well too.


so with 4.5 inches of lift your breathers and brake lines are long enough !! :shock:

I think the first time both front wheels come off the ground at the same time ,as in lauching up a steep hill... You might find you have no front brakes ...... Just a tip .


Agreed. I cant see why one would justify not spending an extra 50-100 to make their 4x4 a little safer offroad.

Anything can happen when brake lines are stretched - as they get old.. the stretching wears out and they start to crack and prolly snap off.

Simple as puttin the rear brake line at the front and gettin a new rear one made up.

TOM
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

bagsy wrote:
dieseldude wrote:
I run Dobinson 3.5 inch heavy duty Gu fronts and same GQ rears in my 97LWB wagon with 30mm spring packers.

I don't need new diff breathers or brakelines as mine all reach. Even at full flex, and it flexes really well too.


so with 4.5 inches of lift your breathers and brake lines are long enough !!

I think the first time both front wheels come off the ground at the same time ,as in lauching up a steep hill... You might find you have no front brakes ...... Just a tip .


Agreed. I cant see why one would justify not spending an extra 50-100 to make their 4x4 a little safer offroad.

Anything can happen when brake lines are stretched - as they get old.. the stretching wears out and they start to crack and prolly snap off.

Simple as puttin the rear brake line at the front and gettin a new rear one made up.

TOM


When the wheels were off and front diff dropped, at full stretch when I was putting the coils and spacers in (without shocks), they still weren't particularly tight.

Anyway, may not be a bad thing to lengthen them but........
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Posts: 115
Joined: Tue Aug 10, 2004 8:36 pm
Location: Sydney

Re: 3" inch lift.....Do I need to extend brake lines???

Post by Chookman »

Thanks for all the advice guys.
Extended the brake lines. The safety issue convinced me.

turps wrote:Not sure if you will need new ones or not. But if you do, a cheap fix is put the rears on the front


Bought a new line for the the back and as turps suggested I tried the old rear line on the front. The old rear gave me all the extra length I needed Works Great :)
Only cost $50 all up. :) :)


Chook
Post Reply

Who is online

Users browsing this forum: No registered users and 127 guests