Well speaking to Mark today and he only has 2 x auto sets left plus 2 x 5sp sets left.
This was out of the initial batch of 25 sets.
So get in while you can before they go it will be at least 6 months before we do another run of these. Email or PM me if interested.
BTW the drawings have been completed for the 3.15 gears (3.5 V6 & 2.8TDI) as Mark is now back from Japan he just has to check them and we can start work on a batch.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Get In Now - Only 4 x 2.85 Gears Left !
Moderator: -Scott-
Get In Now - Only 4 x 2.85 Gears Left !
I just luv my "clacker Jabber"
No 3.15 for the 3.0L. As I understand, the 3.0l tcase is a little smaller. When they R&D'd things, they kept an eye out for "how much is too much" with regards to not having enough material left to handle the forces involved. The outcomes were 2.85 and 3.15. Frank can tell more...
FSMs at http://www.mitsubishilinks.com
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
Yep 2.85 for the 2.6 & 3.0 V6 t/cases and 3.15 for the 3.5 V6 & 2.8TDI t/cases.
The later model 3.5 V6 & 2.8TDI t/cases are larger and have much bigger gears = more room to play.
With the design of these gear modules the limiting factor is the input gear as to how much meat can be shaved off (this gear is actually reduced in size) as to what ratio is achievable whilst maintaining strength.
The later model 3.5 V6 & 2.8TDI t/cases are larger and have much bigger gears = more room to play.
With the design of these gear modules the limiting factor is the input gear as to how much meat can be shaved off (this gear is actually reduced in size) as to what ratio is achievable whilst maintaining strength.
I just luv my "clacker Jabber"
On a related note, does the 2.85 for MTs fit all MTs non-3.5? In other words will the set I got for my 2.6L Gen I fit into my 3.0L Gen II, again, both MTs. Reason I ask is I may have to part with one of them. 
And if I kept the Gen II, I would want to keep the gears. Besides, the likelihood of getting my money back on them in the resale of the SWB is unlikely.
Thx,
And if I kept the Gen II, I would want to keep the gears. Besides, the likelihood of getting my money back on them in the resale of the SWB is unlikely.
Thx,
FSMs at http://www.mitsubishilinks.com
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
Who is online
Users browsing this forum: No registered users and 0 guests