Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TD42 into MQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

TD42 into MQ

Post by berazafi »

Is there any way of addapting a deisel GQ motor into a mq, if so what would be involved

Thanks

Dave
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Re: TD42 into MQ

Post by turps »

berazafi wrote:Is there any way of addapting a deisel GQ motor into a mq, if so what would be involved

Thanks

Dave


Getting the 5pd gearbox and transfer case aswell. Then either run the rear drive shaft at a funny angle. Or fit GQ axles.

To the best of my knowledge, to join it to a MQ gearbox, would all be custom.
THOUGHT FOR THE DAY....
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: TD42 into MQ

Post by bogged »

berazafi wrote:Is there any way of addapting a deisel GQ motor into a mq, if so what would be involved

would it not be easier and probably cheaper in long run to buy a GQ?

for all the hassle, wouldnt a Chev implant be better? say 383 or 350?
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Re: TD42 into MQ

Post by Daisy »

bogged wrote:
berazafi wrote:Is there any way of addapting a deisel GQ motor into a mq, if so what would be involved

would it not be easier and probably cheaper in long run to buy a GQ?

for all the hassle, wouldnt a Chev implant be better? say 383 or 350?


what he said...
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

mmmmmm chev power :armsup:
Gq ute new built
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

yeh TD42 conversion would involve the GQ box and transfer as well with associated driveshaft angles.

You would have to make custom gearbox mounts, Modify ur floor pan to fit the gear shifters, new engine mounts, new radiator plus mounts all new feul and electrics and wiring.

much smarter to either go V8, buy a GQ.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 146
Joined: Thu Oct 16, 2003 7:15 pm
Location: Hunter Valley

Post by muddyperils »

hottiemonster wrote:mmmmmm chev power :armsup:

[u]
Upgrade to a GQ diesel, much better option :twisted:
leave the CHEV to the '0' mile per galloners, if you want to travel this great land.
Top
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

gas conversion....
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

Dellow sells a kit for a GM 6.2/6.5L v8 diesel mated to a Nissan Cabstar 5spd tranny. The GM motor tuned and modded right will rock big time....Cabstar tranny is supposed to be bomb proof. Together I would rather have this combo in any P-troll over the TD42 or any big block or small block petrol v8.

Simply put...I don't think you can get much better than a correctly tuned/fitted 6.5L GM diesel and a Cabstar 5spd. That is of course if you want a diesel & m/t...
www.rmp-o.com
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

RMP&O wrote:Dellow sells a kit for a GM 6.2/6.5L v8 diesel mated to a Nissan Cabstar 5spd tranny. The GM motor tuned and modded right will rock big time....Cabstar tranny is supposed to be bomb proof. Together I would rather have this combo in any P-troll over the TD42 or any big block or small block petrol v8.

Simply put...I don't think you can get much better than a correctly tuned/fitted 6.5L GM diesel and a Cabstar 5spd. That is of course if you want a diesel & m/t...


I have a cabstar 5 speed you can have for $200 but it does need a bit of work :?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

I have a cabstar 5 speed you can have for $200 but it does need a bit of work


you serious!? :shock:

Cost me 3x that to ship it but hey why not! So what is wrong with it? Why do you have it laying around? What did you use it for? You do know I am in the USA right!? It is not a prob to ship it by sea, I do this stuff all the time. I can send you cash. ;)

PM me or whatever...please. :armsup:
www.rmp-o.com
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

RMP&O wrote:
I have a cabstar 5 speed you can have for $200 but it does need a bit of work


you serious!? :shock:

Cost me 3x that to ship it but hey why not! So what is wrong with it? Why do you have it laying around? What did you use it for? You do know I am in the USA right!? It is not a prob to ship it by sea, I do this stuff all the time. I can send you cash. ;)

PM me or whatever...please. :armsup:


For you it is probably not worth it. But for someone local maybe, it needs a new input shaft and gear cluster :cry: Gearbox guy quoted me about $1400 to fix, has a Dellow V8 bellhousing adaptor with it.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

it is worth it to me...I will buy it anyways. I can get the parts. And what v8 bellhousing is it?

PM me or I will be pm'in you.
www.rmp-o.com
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

RMP&O wrote:it is worth it to me...I will buy it anyways. I can get the parts. And what v8 bellhousing is it?

PM me or I will be pm'in you.


Bellhousing is Small Block Chev
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest