Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wiring to arb compressor switch

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

wiring to arb compressor switch

Post by Mr.MojoRising »

how does the wiring go to the back of the arb comp. switch ? i managed to set fire to my loom today, i reckon because the wiring was wrong to the switch. the instructions are piss poor.
Die bad robots !
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

i thought it was pretty straightforward for me.

Did you hook up a FUSE to your compressor as most instructions dont specify about fuse installations.

TOM
Top
Posts: 45
Joined: Wed Jun 30, 2004 10:12 pm
Location: Adelaide

Post by Mr.MojoRising »

mines a 24v, the wiring diagram appears to be reduced so they could fit in some notes, but they made it so small i cant read the wire colours. There is a fuse in the loom.
Die bad robots !
Top
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

Post by Rough60 »

don't no about 24V, but the 12V pulls 19 amp while running, and 25 A to kick in (roughly).
I have 30 A fuse, never blown. Make sure you use decent cable (4GA), I know people that use twin&earth from houses thinking its 240V and will handle 12V but they don't calculate the current draw on something like a compressor.
hope this helps
cheers
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests