Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

no go disco

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

no go disco

Post by ratboy »

just drove a disco v8 auto 95 mod idles well takes of good then when u put your foot down
dies it drives good under 1500 rpm over that dies can make it do it in drive way with foot on brack under load any ideas
ok it was me
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

lean? perhaps fuel filter??
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

does it die no mater what...or if you just tromp on the go pedal? can u get the rpm's up by gradualy accel'in?
Top
Posts: 29
Joined: Tue Nov 09, 2004 1:59 pm

Post by kurmit »

more than likely the fuel pump have you chesked presure and flow yet
A & J racing
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

fuel

Post by ratboy »

trying to find a gauge to check it with do u know what pressure it should run but im thinking its the fuel pump just need to check before spending $$$$$$$ thanks for any help
ok it was me
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Re: fuel

Post by RaginRover »

ratboy wrote:trying to find a gauge to check it with do u know what pressure it should run but im thinking its the fuel pump just need to check before spending $$$$$$$ thanks for any help


I can't remember exaxtly but I have a figure of 35-40PSI in my head,
if you car has 100,000K+ then it is a fairly good chance the pump will need replacing. If you can get the pump out (dunno if there is a floor access panel in a disc) and take it to a parts shop (not a land rover shop) and get them to match it - mine cost $160ish last year

Tom
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

now

Post by ratboy »

it was the air flow meter thanks all
ok it was me
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Just found a bloke who does those $450 exchange if anyone needs one.

$100 held until core returned.

In Sydney.
Top
Posts: 131
Joined: Sun Dec 14, 2003 9:57 am
Location: Melbourne

Post by Evan »

AFM's are expensive !!!
Dont sopose they are a bosch part by any chance ?
$450 for an AFM you are 1/3 to 1/2 the cost of after market management.
E
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Evan wrote:AFM's are expensive !!!
Dont sopose they are a bosch part by any chance ?
$450 for an AFM you are 1/3 to 1/2 the cost of after market management.
E


Hotwire same as a Saab 900 IIRC should be $250 ish

Tom
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 20 guests