Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

10 or 24 spline axles??

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

10 or 24 spline axles??

Post by up2nogood »

Just wondering if any one knows what spline axles an Oct 93 built S1 Disco would be running?

I removed the front hub cap and the stub is 24 spline.
As for the inner front?

And I don't want to unbolt the rear hubcap to find out if I don't have too......

Thanks guys! (and gals).
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

my guess would be 24s all round... 10 splined ceased on Discos in May 93...does it have the 3.9?
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 48
Joined: Mon Aug 30, 2004 11:44 am
Location: Melbourne

Contact:
Contact LukeV

Post by LukeV »

24spline axles have the flatter flanges on the end, while the 10spline have a higher profile and are more rounded. From top of my head without being near my car, I would guess the 24spline flange has a ~20mm profile while 10spline are closer to ~40mm.

Luke
'88 Rangie, 3.9i, Bilstein Shocks and RS Springs, ARB Lockers F&R, 24spline rear axles, Flares, [url=http://users.on.net/~vethaak/Projects.htm]Custom centre console and cargo shelves[/url]
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

If you've got 24 spline stub axles, then you've got inner axles with 24 splines at the diff centre, and 32 at the cv end. The cv and stub axle is one piece with a drive flange on the end of the hub.

The earlier setup had inner axles with 10 spline diff centre, 23 spline cv end.
The cv was seperate from the stub axle, which had 10 splines going into the cv.

So if you can see 24 splines under your cap, you can assume the inner axles are 24/32 spline inners!
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Thanks guys, looks like I got the right one as far as axles go (until they snap).

It's a 3.9.

Although I reckon I might just toss in some Jac Mac hypoid lockers.....
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

up2nogood wrote:Thanks guys, looks like I got the right one as far as axles go (until they snap).

It's a 3.9.

Although I reckon I might just toss in some Jac Mac hypoid lockers.....


Go to the Sticky FAQ and read about the 32 spline cv's.
John
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 39 guests