4.2L GU (ST-L) Patrol Pics...05 Model

Post by **XFACTOR** » Mon Dec 13, 2004 10:31 pm

hey, well we got our new car a few weeks back now..

and heres some pics...

there is no front or rear bars yet as ARB dont get them in until Jan.. and theres still alot more stuff to go on....

Straight out of the shop...

And with the 7 inch llift and some of the mods

Post by **X-R-Cist** » Mon Dec 13, 2004 11:16 pm

very very nice!

cant wait to see it with the bars on, i must say that the patrols look very geeky with their standard bumperbars

but that is overshadowed by the 7 inch lift :lol:

Post by **XFACTOR** » Mon Dec 13, 2004 11:20 pm

yeh, and the HUGE lights...

we didn't get the nissan aftermarket front bar as it looks weak

althogu the back of the car doesnt look too bad with the stock plastic bar..but the front is Grimace :lol:

Post by **tankekwee1972** » Tue Dec 14, 2004 2:23 am

XFACTOR wrote:
[

XFACTOR... could you take a couple of pics as to how the rear spottie is installed on the spare wheel? Been chasing idea on how to mount it on a GQ.

Thanks.

Post by **bogged** » Tue Dec 14, 2004 8:29 am

tankekwee1972 wrote:XFACTOR... could you take a couple of pics as to how the rear spottie is installed on the spare wheel? Been chasing idea on how to mount it on a GQ.

Just welded some box section onto the wheel carrier on mine.
or look at Kaymar ones at $140, they have 2 tabs that mount on the wheel carrier bolt holes..

7in lift? Why?

Post by **XFACTOR** » Tue Dec 14, 2004 8:58 am

bogged wrote:
tankekwee1972 wrote:XFACTOR... could you take a couple of pics as to how the rear spottie is installed on the spare wheel? Been chasing idea on how to mount it on a GQ.

Just welded some box section onto the wheel carrier on mine.
or look at Kaymar ones at $140, they have 2 tabs that mount on the wheel carrier bolt holes..

7in lift? Why?

So that it doesnt get grass stains underneath it

the 7 inch is at about 5...so its good..and you get the extra wheel travel...and you have more clearence to get through hard tracks...

Post by **muddies** » Tue Dec 14, 2004 2:50 pm

what is the rack for the spotties made from? :lol:

Post by **morkz** » Tue Dec 14, 2004 8:15 pm

nice truck by the way

hey did u use for panhards surely you couldnt have used your old ones from the GU ? just curious or did brett make up new custom ones?

i'm going to put some 4" coils in my GU i can clear my 35 now but i want a bit more height and flex as well...

keep everything posted on here i liked your old GU as well..

Post by **XFACTOR** » Tue Dec 14, 2004 10:02 pm

yes, panhards did fit

hopefully the car will look better for 'bogged' with the bars on it....

Post by **morkz** » Wed Dec 15, 2004 8:05 am

oh ok are your panhards wizard?

not sure at the moment who's actually making them for series 3 GU's but yours was a series 1 i believe.

yeah it should look better with an ARB bar up front or kaymar in the rear are u going to get them colour coded at all?

Post by **bogged** » Wed Dec 15, 2004 10:14 am

morkz wrote:not sure at the moment who's actually making them for series 3 GU's but yours was a series 1 i believe.

Whiteline?? www.bigballsoffroad.com

Post by **blkmav** » Thu Dec 16, 2004 2:41 pm

When are the new Ti's available?

Post by **XFACTOR** » Thu Dec 16, 2004 2:47 pm

blkmav wrote: When are the new Ti's available?

I think the TI's were delayed because of GPS problems..

Outer Limits 4x4 Board

4.2L GU (ST-L) Patrol Pics...05 Model

4.2L GU (ST-L) Patrol Pics...05 Model

Re: 4.2L GU (ST-L) Patrol Pics...05 Model

Re: 4.2L GU (ST-L) Patrol Pics...05 Model

Re: 4.2L GU (ST-L) Patrol Pics...05 Model

Who is online