Im thinking of using these shocks for a 3 inch lift on the coily as Ive been told that the front spring mount can be welded to the rs9000 series. Snake raceing advertise rancho shocks for coils but im unsure whether this is front and rear or rear only and whether the front would cost more due to the extra work required. What springs are recomended for a lift of this size?
Thanks, help appreciated especially from the boards vendors.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rancho rs9000 for coily.
you got tose rears i said heath?
your best bet is to pm mud4b about the ranchos for the front end or even overkill
but ring up king springs and nicely ask for 3 inch lifted coils
as the dont have them off the shelf
your best bet is to pm mud4b about the ranchos for the front end or even overkill
but ring up king springs and nicely ask for 3 inch lifted coils
as the dont have them off the shelfTOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Based on the awfully soft valving they have I would go with 99009 allround, but I think you wil have major issues with the shock binding into the shock tower on the front. I have done HEAPS of measuring with Paul G's car.
PS 99009's are eye bottom and pin top and have about 10"- 10.75" of travel. I don't recall exactly, but I have them onthe back of my G.
PS 99009's are eye bottom and pin top and have about 10"- 10.75" of travel. I don't recall exactly, but I have them onthe back of my G.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Gwagensteve wrote:Based on the awfully soft valving they have I would go with 99009 allround, but I think you wil have major issues with the shock binding into the shock tower on the front. I have done HEAPS of measuring with Paul G's car.
PS 99009's are eye bottom and pin top and have about 10"- 10.75" of travel. I don't recall exactly, but I have them onthe back of my G.
Very interested in what you wrote here.....
So you have these shocks running on a coily? Pics?
I am about to increase the diameter of the front shock tower will I then be able to fit the 99009?
Did you change the mounting setup in the rear to mount pin to eye shocks?
Any other issues e.g. constantly bottoming the shock out?
Thanks
HRZOOK
HRZOOK wrote:Gwagensteve wrote:Based on the awfully soft valving they have I would go with 99009 allround, but I think you wil have major issues with the shock binding into the shock tower on the front. I have done HEAPS of measuring with Paul G's car.
PS 99009's are eye bottom and pin top and have about 10"- 10.75" of travel. I don't recall exactly, but I have them onthe back of my G.
Very interested in what you wrote here.....
So you have these shocks running on a coily? Pics?
I am about to increase the diameter of the front shock tower will I then be able to fit the 99009?
Did you change the mounting setup in the rear to mount pin to eye shocks?
Any other issues e.g. constantly bottoming the shock out?
Thanks
HRZOOK
His "G" is his Gwagen
yeshemesh
Gwagensteve wrote:Based on the awfully soft valving they have I would go with 99009 allround, but I think you wil have major issues with the shock binding into the shock tower on the front. I have done HEAPS of measuring with Paul G's car.
PS 99009's are eye bottom and pin top and have about 10"- 10.75" of travel. I don't recall exactly, but I have them onthe back of my G.
The shock tower on the front could use some trimming. I cant see why this would be a biggy. it looks to be simply a tube. if you cut it shorter then you will have more clearange due to a better angle.
A1MAV done this on his coily cut the tower and welded 10mm plate in there i think this was to allow the use of the standard strut and just got some lifted coils
worked well
worked well
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
--------------------------------------------------------------------------------
A1MAV done this on his coily cut the tower and welded 10mm plate in there i think this was to allow the use of the standard strut and just got some lifted coils
Hi does any one have any pics of this i am thinking of doing just this but not sure on how to fix the shock ??
any help would be great
cheers
Gareth
A1MAV done this on his coily cut the tower and welded 10mm plate in there i think this was to allow the use of the standard strut and just got some lifted coils
Hi does any one have any pics of this i am thinking of doing just this but not sure on how to fix the shock ??
any help would be great
cheers
Gareth
Who is online
Users browsing this forum: No registered users and 33 guests