OK, am going to get this welded back together. can anyone tell me if the bush will still be ok after its welded? or will it need a new one?
Craig
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux adjustable diff locator
Moderators: toaddog, Elmo, DUDELUX
G´day from Austria, my name´s Michael, i´m new at the board!
Let me give you a short empiric report about the adjustable diff locator (rancho).
My Lux (92´ doublecab) is standing on stonger springs (genuine Toyota).
Spring lift in front is 2", about 4" in rear, and the front leaves at the drivers side were also saging (about 1"). I ordered the diff locator directly from "Down Under" (not available in Europe) for AU$180 (incl. shipping/taxes).
The installation:
The first bolt could only be taken out by force, because of the enourmos spanning. The further de-installation and the re-installation of the new torque rod was easy. Only the re-establishment of the correct angle of the cardan shaft/diff should be considered. Fortunately the leaves were not too much worn out.
The result:
The steering wheel stands straight again, more travel for the front axle, no surprises when you step on the brake pedal
I never repented the installation of this part.
Regards
Michael
Let me give you a short empiric report about the adjustable diff locator (rancho).
My Lux (92´ doublecab) is standing on stonger springs (genuine Toyota).
Spring lift in front is 2", about 4" in rear, and the front leaves at the drivers side were also saging (about 1"). I ordered the diff locator directly from "Down Under" (not available in Europe) for AU$180 (incl. shipping/taxes).
The installation:
The first bolt could only be taken out by force, because of the enourmos spanning. The further de-installation and the re-installation of the new torque rod was easy. Only the re-establishment of the correct angle of the cardan shaft/diff should be considered. Fortunately the leaves were not too much worn out.
The result:
The steering wheel stands straight again, more travel for the front axle, no surprises when you step on the brake pedal
I never repented the installation of this part.
Regards
Michael
Who is online
Users browsing this forum: No registered users and 3 guests