ok i searched searched and searched...
I know the right angle adaptor is available but i also read about using a mazda part? Anyone help me here. I will be soon scouring the wreckers yard for a KL mazda altenator.. perharps i can look for it too.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Little Q's on a GTi
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Little Q's on a GTi
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Hi
Quote from another forum . Have not looked into it myself so need s a bit more looking into . Seems to imply the dissy's on the to are the same but I did not think this was the case
------------
Or you can just use a mazda distributer of a DOHC Turbo its the same as the
distrubuter suzi sport in Australia sell for both the G16A swift engine
onversion and the G13B DOHC conversion. You can get them from pick-a-
part for about $15-$20 so a cheaper alternative and saves chanaging the cam
too!
----------------
Cheers
Chris
Quote from another forum . Have not looked into it myself so need s a bit more looking into . Seems to imply the dissy's on the to are the same but I did not think this was the case
------------
Or you can just use a mazda distributer of a DOHC Turbo its the same as the
distrubuter suzi sport in Australia sell for both the G16A swift engine
onversion and the G13B DOHC conversion. You can get them from pick-a-
part for about $15-$20 so a cheaper alternative and saves chanaging the cam
too!
----------------
Cheers
Chris
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
GTI Conversion
Hi have done the gti conversion in a 96 sierra with an angle drive adapter using the original distributor
i looked into the Mazda GTX 323 distributor and its not worth it as the cap and rotor are hard items to find and if you do source them you should get a few extra's the cap needs some tags shaved off the inside, and the rotor needs to be machined so it fits on the distributor.
or the third option is to box the firewall and use the original gti distributor
but the best option is the angle drive and the sierra cap and rotor are cheap and common
i looked into the Mazda GTX 323 distributor and its not worth it as the cap and rotor are hard items to find and if you do source them you should get a few extra's the cap needs some tags shaved off the inside, and the rotor needs to be machined so it fits on the distributor.
or the third option is to box the firewall and use the original gti distributor
but the best option is the angle drive and the sierra cap and rotor are cheap and common
MQ Patrol 35" MTRs, Lifted, Lockers
Who is online
Users browsing this forum: No registered users and 47 guests