Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brake Problem

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Brake Problem

Post by Drift Technician »

Ok guys was 4wding yesterday brakes were working normal, gave them a bit of a hard workout climbing soem creek bed walls, now the brake pedal is extremley hard and there is little to no brakes whatsoever. Brakes were working fine before this, i noticed the resivor was a little empty after coming back so i put more brake fluid in but hasnt done anything. BTW its a 83 SWB Paj................
If its not upside down and on fire, I'm not trying hard enough.......

My Build: [url]http://www.outerlimits4x4.com/phpBB2/ftopic177269.php[/url]
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

It sounds like your booster has stopped working.
Put your foot firmly on the brake pedal and start the engine,if the booster is working it will suck the pedal down ,maybe an inch or so.
Does the engine still idle? are all the vaccum hoses on?
J Top
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Yep - I'd start with buggered booster. But I've never had to fix one, so I can't offer any more advice.

Good luck,

Scott
Top
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Post by Drift Technician »

pedal doesnt go down at all when the car is started..... engien runs and idles fine im assuming you guys mean the master cylinder when you mean booster?
If its not upside down and on fire, I'm not trying hard enough.......

My Build: [url]http://www.outerlimits4x4.com/phpBB2/ftopic177269.php[/url]
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

The booster is the cylinder behind the M/C that the M/C is bolted to.
I would have thought that if the booster was faulty the idle would be upset
Start with the basics,bleed the brakes,jack the wheels off the ground and see if the brakes are working at all the wheels.
J Top
Top
Posts: 134
Joined: Wed Jan 01, 2003 6:49 pm
Location: Sydney

Contact:
Contact 4runna

Post by 4runna »

Is it Petrol or diesel?

Idle won't be upset if it's a diesel as it's only a vacuum pump running it.

If it's a petrol, it could be a very small leak in the booster diaphragm or vacuum hose.
Or an even more common one (especially with the number of V6 pajeros I have seen smoking,) the vacuum pipe or t piece gets blocked with oil scum and carbon, give it all a check, especially around the inlet manifold outlet and 1 way valve (if installed)
if it's just blocked up then obviously it won't affect your idle either.

Rob
96 Paj 2.8 TD 2" lift, Snorkel, LR Tank, Dual Batt, winch, 32 MTRs, RT tent and rack, polyairs etc
Top
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Post by Drift Technician »

Its petrol, the good old 2.6 litre. Only vacumn hose i can see is a large onw running from the booster to the inlet manifold. Inspected it for leaks and such but couldnt find anything. Might pull it apart toomorrow and have a look and see if its something diabolical..............
If its not upside down and on fire, I'm not trying hard enough.......

My Build: [url]http://www.outerlimits4x4.com/phpBB2/ftopic177269.php[/url]
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests