Where should i get my lock rite from?

Post by **SiKiD_01** » Sat Jan 01, 2005 2:01 am

i've sorta finally got enough money for a locker, only now i need some info on where to get it from.

i know people wont be open for the next week, but if i can get the info now, i'll be able to chase it up and see how much it'll all cost.

i know some people got their locker(s) from the states, but which company was it again? i also read the lock right without side couplers is stronger/lasts longer, true or false?

thanks in advance
steve

Post by **SiKiD_01** » Sat Jan 01, 2005 2:14 am

just went to rocky road site, lockrite with NO side couplers is $327.4844AUD with current exchange rate.

:cry:

thats with air mail.

$320.6737 AUD for surface mail. like $7 difference. will customs get me too?

this can't be the cheapest? or can it....

Post by **-Mick-** » Sat Jan 01, 2005 1:44 pm

I just posted this in general tech

It was from Rocky Road. Is 320 to much for you

still kills the local price

FYI I imported a lockright from the US for my suzuki recently. It was an online purchase from an aftermarket 4wd business in the states, imported privately. Due to the weight of the thing (bugger all) it only cost $30 postage by air mail.

The total cost delivered to my door was $299 australian I'll soon order another because really how can you beat that It took 5 weeks to deliver, usually 3 but they were out of stock at my time of order.

You risk copping an extra duty tax of $100 at customs too but they rarely put that on packages of small weight and value. Hence import one at a time

Post by **Beastmavster** » Sat Jan 01, 2005 3:49 pm

Free trade agreement should have started today. Worst you should be up for is about $60 in GST and inspection fees.

Last I was looking these were about $189-239 US at places like calmini, trail tough etc , but a quick check shows them at $239 at calmini right now. There's often specials though.

Roadlessgear do them for $215 US which is about $280 Australian right now.

http://www.roadlessgear.com

Trail tough want $199 US or $99 for the mini spool

Post by **stumped** » Sat Jan 01, 2005 3:53 pm

roadless gear is good, i got mine thru them....

http://www.roadlessgear.com/page/RGL/CTGY/DD $175 for detroit, $185 for lockrite.... i went detroit, pretty happy with it. that was for a sierra tho...

Post by **Beastmavster** » Sat Jan 01, 2005 4:30 pm

Nice big arguement in general tech.

Better not go cap in hand to ARB anytime soon for sponsorship.

Very interesting how trailtough in the US sell ARB lockers for about 2/3 what ARB want for them here isnt it....

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=33172

Post by **SiKiD_01** » Sat Jan 01, 2005 8:30 pm

whats the difference between the lock right and the detroit? apart from price?

Post by **ryna** » Sat Jan 01, 2005 8:59 pm

I wanna know exactly how an auto locker works, like how does it know when to turn on/off ???

Also if its on all the time except corners, then wat if ur on a corner offroad on an uphill

Ryan

Post by **SiKiD_01** » Sat Jan 01, 2005 9:15 pm

http://www.tellico4x4.com/powertrax/lockright.html

if you can understand a 'cam' action, its not too hard to understand how the locker works.

i've had difficulty explaining this to someone in person, dont think i should attemp to do it in writing.

basically it usues the carrier centre pin/cross shaft to force the two centre couplers out and locking in the side gears to the carrier. if you look closely at the link above and the pic it shows, the channel in which the cross shaft sits does not fit exactly on the crass shaft, and so when the carrier turns the cross shaft. it forces the centre couplers out locking in the side gears........

well i know what i'm talking about, so sorry if you still dont understand, maybe someone else can explain it better.

Post by **roadrunner** » Sat Jan 01, 2005 10:38 pm

Steve,

Have you thought about welding the rear ?

Post by **SiKiD_01** » Sat Jan 01, 2005 10:56 pm

roadrunner wrote:Steve,

Have you thought about welding the rear ?

NUMEROUS times. the only thing is, i dont know of anyone who has experience in welding diffs, and cos i live so far away from everyone (darwin) getting another centre/axles will be hard and a PITA.

if i knew of someone who is good and experienced with welding diffs up here, i would have done it already. a couple of people want $200 to weld the diff, and the diffs they've welded have been for holden utes and geminis, and most have broken.

there is an engineering shop up here that does a lot of driveshaft repairs and mods, and they can weld diffs alright, but was about $350.

so it just makes more sense in getting a lockright locker, and waiting for it, as i've been waiting for the past year to get at least one end locked on the vit.

anyone in DARWIN who can weld diffs good let me know. i can supply a carton or two.

Post by **Beastmavster** » Sat Jan 01, 2005 11:44 pm

Can always get the spool - like a welded byt you can replace all the bits which you cant do with the welded. Less likely to break too.

Post by **SiKiD_01** » Sat Jan 01, 2005 11:55 pm

i haven't given a lot of thought to the spool.

how much roughly am i looking at? and is it readily available in aus?

Post by **lay80n** » Sun Jan 02, 2005 6:12 pm

There is a thread a little while back here talkin bout mini-spol for sierra. THey are available in the states, not to sure bout hre. Might be worth a look.
Layto....

Post by **Beastmavster** » Sun Jan 02, 2005 6:58 pm

They're available at rocky road not roadless gear as I put up there earlier. Price is $99 US.

Less likely yo break than a welded unless the guy really fills it up with good weld, and completely reverseable.

Post by **Toos** » Sun Jan 02, 2005 8:15 pm

Got mine from Rocky Road no problems at all.

Post by **SiKiD_01** » Mon Jan 03, 2005 8:02 pm

thanks for the info guys, i have it all saved on my PC, but unfortunately, i can't get one now.

i had to divert half of the 'locker fund' to the 'weber carby install'.

hopefully in a couple of months time i may have anough for a locker then, but then theres that performance cam some people got me thinking about.

oh well, joys of being a tight a$$ student. may have to invest in a months worth of those 2 minute noodles again.

thanks again
Steve

Post by **Beastmavster** » Mon Jan 03, 2005 10:58 pm

You can buy the Mi Goreng Noodles in packs of 10 to save moeny and they have 5 different sauces

Post by **SiKiD_01** » Mon Jan 03, 2005 11:44 pm

i already do mate!

we're on the same level.

p.s. the Mi-Goreng noodles have sachets of: 1 seasoning (powder), 1 fried onion, 1 chilly sauce (quite hot), 1 garlic oil, 1 soy/oyster sauce one.

but all good!

Post by **OldGold** » Tue Jan 04, 2005 4:22 am

You know you can buy the soy sauce out of mi goreng noodles on it's own in a bottle... bit of sweet chilli sauce, chilli powder, and some garlic paste, tastes pretty good and as much as you want

Outer Limits 4x4 Board

Where should i get my lock rite from?

Where should i get my lock rite from?

bncncbcvncb

hgdgd

bcvbcvbcvb

fdgfdsgdfsg

jhg

jhgjf

dsfadsf

Who is online