Who works on trucks in Brisbane?

[benno_from_brizvegas]

The old man just bought a Mitsu Canter 4x4 and wants to do a few things to it.

He's looking for an airbag system and modded springs to soften the ride up unladen, i believe there's a mob on the southside that do it, any other recommendations?

And a turbo, what are your reccomendations for a diesel shop that install a turbo on a big-arse truck?

Lastly, anyone know a mob that can make or source foam sandwich panels with timber veneer or ply on one side and fiberglass on the other?

Cheers
Benno

[bilby]

theres a place in capalaba , truck gas i think they mite do it unsure could be wrong ?

[I.M.P.O.S.E]

Mate I know its not Brisbane, but Tucker Suspension in Murwillumbah (about 2hrs from Bris) do all the air bag work for country energy/ energex and other big stuff! They are at 3 Quarry Rd Murwillumbah 2484 (02) 6672 6600 I havent had any work done by them, just here things from people in the know.

[phippsy]

For the foam panelling you could try Camec on Beaudesert Rd, they do everything for caravans and rv's or they might be able to point you in the direction for it.

[just cruizin']

For the air bags go to the airbag man at Brendale, turbo I'm not sure but ring any of the truck centres like Qld Diesel Spares etc and they'll know and the fibreglass could be done by any fibreglass mob check the yellow pages, really depends what you're after what are you doing with it. Large flat panels with a foam layer and ply try Vanglass up the coast they can make sheets up to about 2.4m wide to 8-10m long