Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nissan GQ alternator...Upgrade

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

nissan GQ alternator...Upgrade

Post by bagsy »

This is on a 93 petrol efi GQ , Mines got a hitachi 70 amp on it and its playing up and whines now .Ive pulled it apart and replaced the bearings ( 5 bucks each ), but its still whining.Rather than waste any more time with it ive been considering upgrading any way. As im running dual batteries and a 8000 high mount and 4 spottys its probably long over due. Any one got some ideas or advice on which auto elec to go to, Im in sth east suburbs melb . Thanks in advance......shane
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

well heres an update... I got a price for a 90 amp bosch fitted for 300 bucks what do you guys reackon.
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

can you try to adapt a different alternator i think one of the cruisers use 120 amps don't they?
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

even better try to get a commodore or falcon one to fit these are around 120-130amps. And I would expect toe be pretty vheap at the wreckers. If the brackets arnt even close. You maybe able to get the insides just changed over. And run something like a commodore alt insides in the GQ houseing.
I have heard this mentioned on here before.
THOUGHT FOR THE DAY....
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

lucky me i have a commodore motor in the patrol :D
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 14
Joined: Tue Jul 27, 2004 7:39 pm
Location: VICTORIA

GQ ALTERNATOR

Post by TRITON90 »

THE STANDARD COMMODORE ALTERNATORS ARE 85 AMPS. YOU NEED ONE OFF A VT V8, THEY ARE 120 AMPS.
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

thanks for the replys. I went for the 90 amp at 300. After much reserch i concluded that the 120 amp was overkil and more expensive. shane...
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

I heard of some guys ( I think it was one of the Hall brothers) using some big ****off alternater on his GQ. When he wanted to do some metal work to the rig he apparently just unplugged the wiring off the back and plugged in the angle grinder etc and started the car and ran it with a few revs and went to town with the angle grinder. Anyone heard of or done this????
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Post by Slug »

Site doesnt work too well for me although this mob http://unipower.com.au/ seem to be the go for vehicle mounted welding gear and 240v though :D
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Cheers Daniel. I sent them an email to get some more info, I'll let you know how I went. :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Got an email back from unipower on the alternator based welder/ power outlet. This price was based on their new AC 3000Watt kit.

For your info the basic kit (un-installed) cost approximately $3750/-
ex-factory.




:shock: :shock: :shock: :shock: :shock:
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 18 guests