Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series coil spacers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 156
Joined: Mon Dec 09, 2002 10:25 am
Location: Canberra

80 series coil spacers

Post by Roktruk »

The shocks have finally quit on the Roktruk, so I'm looking at a set of OME long travel shocks (for the 3" lift) and a set of 30 mm Pro Comp coil spacers. Any one running either? I'm after opinions on the shocks and spacers. What's involved in fitting the spacers? Do the bump stops reauire re-locating? I've put a set into a Disco, they simply slotted into thse top of the spring.
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

It is just a matter of putting them on the top of the springs...

The bumpstop do hold them in place.
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

The OME shocks work grouse - I run 6 on my car and they are neat as on 3" lift. Tyes 6 . 4 softs on the front and 2 hards on the rear.
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest