Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
buying a used 100 series
Moderators: toaddog, Elmo, DUDELUX
buying a used 100 series
i mate of mine wnats to buy a 2nd hand 100 series
what do you Tojo guys think of them and what problems do you no about thatcan happen with them
what do you Tojo guys think of them and what problems do you no about thatcan happen with them
100series 2002 4.5/LPG
GET YA GEAR OFF ROAD
www.4x4web.com.au/dinos4x4
GET YA GEAR OFF ROAD
www.4x4web.com.au/dinos4x4
I have a mate with a really well set up one for sale. Factory Lockers, Rear bar etc.
Email ash_01@hotmail.com for more info.
Email ash_01@hotmail.com for more info.
if you have the guts....follow my ruts!
berett wrote:They're a good rig inside and ride wise, but my mates one is on its third front diff. It did the front diff again yesterday.
What is the story with the front diffs on these things, like I said my mates one has done three now! So why are they so weak????
heres a few possibilities....ratio is lower than 80 series, meaning more torque can be transmitted through the gears and it can go bang easier...than the 80 series which used thesame weak diff centre.
100 is heavier....bigger c/v's, same old ctr...weak spot.
Interesting comment by an older racer...he said he used to put Warn hubs in his racers because they blew b4 the c/v....might be worth considering on a 105 :-)
Andrew
The front diff on the 80 is the rear high pinion front the rear of Forerunners.
They are very weak in reverse and that is the weak link. Try not to dump the clutch in reverse and you'll be fine...
touch wood - mine has had no issues in the 100,000 that I've been abusing mine!!! I run Aisin hubs and don't have a locker - seems to deal with the 37's fine!!
They are very weak in reverse and that is the weak link. Try not to dump the clutch in reverse and you'll be fine...
touch wood - mine has had no issues in the 100,000 that I've been abusing mine!!! I run Aisin hubs and don't have a locker - seems to deal with the 37's fine!!
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Who is online
Users browsing this forum: No registered users and 1 guest