Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ideas on repairing rear quarter panel

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

ideas on repairing rear quarter panel

Post by Tzi »

I'm looking into buying this feroza (sometime this week), and was wondering if you guys had any ideas on the cost involved to fix such a dent.
obviously the flare will need to be replaced (daiauto has em for $132 each :shock: ) but the panel behind it has no rips, cuts, or cracks... its just dented.
is the panel accessible from the inside? or is it a double panel?
I can see in the photo (and the several others I have) that the panel has a join under the front ddor, and just above window(bottom) level...
is it a removable panel by some chance?? :?

has anyone had such damage repaired?

thanks in advance --Tzi
You do not have the required permissions to view the files attached to this post.
------------------------------------
Tzi -- beware of cheap imitations
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

As you've seen from the flare price Daihatsu parts aren't cheap.... Even the end caps on the bumper bar are very expensive IIRC. There could easily be other damage in behind the panel to the floor pan and fuel filler, plus the chassis rails run fairly close to where that damage is.

I'd suggest to forget it and keep looking for another one.
David
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

ok thanks.. I just needed someone "in the know" to tell me ;)
------------------------------------
Tzi -- beware of cheap imitations
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

You should be able to find a few around if you're prepared to travel to Ballarat and possibly Melbourne. The one you're looking at appears to be an ELII/ III (?) narrow track; a widetrack FerozaII would be better if you can find one in your price range.
David
User avatar
Tzi
Posts: 236
Joined: Mon Jan 10, 2005 6:54 pm
Location: Bendigo - Australia

Post by Tzi »

There is a wide track for sale in the trading post for 6999, which is a little outside my price range.
I 'm hoping to trade in my charade, with a changeover figure of 3k.. so I am looking at under $6000 to get a feroza.
if you have any suggestions then that'd be cool, I'll be heading off to melb tomorrow to look at 2 in that price range. there's none in ballarat that I know of tho.
------------------------------------
Tzi -- beware of cheap imitations
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Try searching on the Trading Post on line www.tradingpost.com.au ; plus search these sites :

http://www.carsales.com.au/

http://www.carpoint.com.au/

http://www.carsbyweb.com.au/

I had a quick look on Carsales and a white 1992 DX came up in Ballarat districts for $4888; plus some others below $6000 in Melbourne suburbs.
David
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests