Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARHHHH!!! FARKING DIFF!!!!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

ARHHHH!!! FARKING DIFF!!!!

Post by glen1n »

Need to change the diff centre in my 70, but the old one comes off the damn bolts and then doesnt want to budge. It is busted after being welded. Here are some pics.

This is meant to be screwed right in so you cant see the thread, correct? perhaps this be the problem. Tried hitting it around but again it wont budge. I might need to take a grinder to all of it :D

Image

Look how far its off the DAMN BOLTS!!!!!!!!!!!!

Image
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Glen see that screw bit get something ad thread it back into the diff as that would mostlikeyl be your problem..
----HillBilly Engineering----
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

so the center isnt comming out of the housing ?
www.overkill4x4.com
ph 94766137
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Dumb ass question ..... are the axles out of the center ????
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Lump hammer...
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

glen adam is right, the carrier bearing adjuster you can see in that pic is loose, and needs to be screwed back in before the diff will come out. the bad news is, if the carrier bearing retaining bolts are still tight, those screws are really hard to turn.

did you put it together without the carrier bearing adjuster nut stop tabs?? (the little useless looking steel tabs held on the ends of the bearing retainer caps by weedy little M8 bolts)

I would post a pic but there is no room left on the board for nay more pics.
Free air locker to the first 20 callers!
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Its definalty loose you can see the thread and did the centre grinade that will be the cause and I hope that isn`t the one That just had the locker put in or someone will be in trouble :twisted:
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


If the axles were not out the diff wouldnt have come out as far as it did, so keep your dumb ass replies to your self :roll:
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

spazbot wrote:so the center isnt comming out of the housing ?


Correct

dumbdAnce wrote: the carrier bearing adjuster you can see in that pic is loose, and needs to be screwed back in before the diff will come out.


Thought this may have been the case, bugger.

4sum4 wrote:I hope that isn`t the one That just had the locker put in or someone will be in trouble


Nah it was the welded rear, so that certain somebody is ok ;)





Thanks for the replies fellas. i'll give it a go later :)
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

glen1n wrote:
Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


If the axles were not out the diff wouldnt have come out as far as it did, so keep your dumb ass replies to your self :roll:


Took the words out of my mouth :D
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

You fixed it yet glen?
----HillBilly Engineering----
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

dumbdunce wrote:glen adam is right, the carrier bearing adjuster you can see in that pic is loose, and needs to be screwed back in before the diff will come out. the bad news is, if the carrier bearing retaining bolts are still tight, those screws are really hard to turn.

did you put it together without the carrier bearing adjuster nut stop tabs?? (the little useless looking steel tabs held on the ends of the bearing retainer caps by weedy little M8 bolts)

I would post a pic but there is no room left on the board for nay more pics.


They were on...i think the center just grinaded.
----HillBilly Engineering----
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

STFU A-holes, Hope it never comes out if you answer a reply like that
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

Bad JuJu wrote:STFU A-holes, Hope it never comes out if you answer a reply like that


Cheers for the input.
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

MY45 wrote:You fixed it yet glen?


Gonna give it a go later. It was giving me the runs so i need time to cool off.
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


Sorry mate, read it a second time and relised you were saying your question was stupid, not mine. Correct?

Glen
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

glen1n wrote:
Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


If the axles were not out the diff wouldnt have come out as far as it did, so keep your dumb ass replies to your self :roll:


chill out man :roll: :roll:

he said it may b a dumb question b4 he asked it...
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

glen1n wrote:
Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


If the axles were not out the diff wouldnt have come out as far as it did, so keep your dumb ass replies to your self :roll:


I was going to ask the exact same Question.


He was only trying to help. Maybe you want to read before you reply next time :roll:
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

hypolux wrote:
glen1n wrote:
Bad JuJu wrote:Dumb ass question ..... are the axles out of the center ????


If the axles were not out the diff wouldnt have come out as far as it did, so keep your dumb ass replies to your self :roll:


chill out man :roll: :roll:

he said it may b a dumb question b4 he asked it...


i noticed that after i replied, hence my post above yours. Once again i thought he was refering to my question, not his. Sorry dude :)
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Its ok every one ... its sorted now.

Cheers
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

feel the love!

get the diff out yet?
Free air locker to the first 20 callers!
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

dumbdunce wrote:feel the love!

get the diff out yet?


nah got maggot yesterday, it was to hot today, and it's about to thunder now. Maybe tomorrow. :D
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

This should be of some use dude.... :D

Image
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 1102
Joined: Tue Dec 02, 2003 10:50 pm
Location: R%P3, $%Pn3%

Post by glen1n »

+dj_hansen+ wrote:This should be of some use dude.... :D

Image


Where would we be without it? :D
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests