Hi all,
Looking to remove the R A N G E R O V E R decals from the front and rear of my truck, and put on some stainless laser-cut ones. Has anyone tried to remove these before? Is there a proven technique? Or just have go with a heat gun, scraper blade and some patience? The ones on the front look pretty crusty!
Linc
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
RANGE ROVER decals
Moderator: Micka
RANGE ROVER decals
Leave mud piles in the work carpark.
You're on the right track, heat gun, hard plastic scraper and use some metho on them before hand to soften them up. Then once you have the outer skin off and there is the left over adhesive underneath use more metho or better still at this stage use eucalyptus oil to rub the rest of the glue off.
Hope this helps....
Hope this helps....
weekend before xmas someone scratched off the top of the R and whole E and R with there finger and didn't scratch the paint (original paint is under the strickers) I wasn't happy as in now says Hang Over...my stickers were in really good nick to.
going to pull the stickers off and fit the plastic letters
going to pull the stickers off and fit the plastic letters
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Who is online
Users browsing this forum: No registered users and 35 guests