i own an 84 model s/c lux and my breaks are playing up.when i first put my foot down i have normal pedal feel but as i keep pressure there my foot almost goes to the floor.
has anyoen had this problem?
i was thinking it could be the master cylinder?
there doesnt seem to be any leaks anywhere in the break system
any help appreciated
batcho101
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
breaks problem on lux
Moderators: toaddog, Elmo, DUDELUX
breaks problem on lux
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
what do u mean by "by-passing itself"?
woudl it have a leak in the cylinder which creates pressure so that as u first put your foot down there isnt engouh space for most of the fluid to escape btu when u hold it it slowly leaks itself out?
woudl it have a leak in the cylinder which creates pressure so that as u first put your foot down there isnt engouh space for most of the fluid to escape btu when u hold it it slowly leaks itself out?
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
it means the fluid is passing one of the seals inside the master under pressure. if you undo the master off the booster you will probably find fluid leaking out from behind. Let too long besides the fact one day you will hit a hard immoveable object it will probably leak into the booster and trash it too. You have a couple of options.
1. Rebuild master cylinder but you can only do if you have someone who knows what they are doing available and if the bore is not scored.
2. If you bore is scored have it bored out and stainless sleeves fitted. Advantage is will never score bore again. Disadvantage is its rather expensive.
3. Buy a new master cylinder and swap it over.
All in all its probably cheaper and easier to fit a replacement master cylinder
1. Rebuild master cylinder but you can only do if you have someone who knows what they are doing available and if the bore is not scored.
2. If you bore is scored have it bored out and stainless sleeves fitted. Advantage is will never score bore again. Disadvantage is its rather expensive.
3. Buy a new master cylinder and swap it over.
All in all its probably cheaper and easier to fit a replacement master cylinder
the car is just trying to tell u that it dont like u...
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Budscustoms Facebook Page
Who is online
Users browsing this forum: No registered users and 5 guests