Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

inter state dot rules

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

inter state dot rules

Post by damo lux »

If you buy a vehicle from say nsw and want to take it to qld, and the vehicle has mods that are engineered in nsw, does the vehilce have to be re engineered and have a new mod plate or would the nsw one be suffice? :?:
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Post by morkz »

i believe it has to be re-engineered if your chaing the rego from NSW to QLD
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

just keep the rego in the state of origin..... much easier and in the case of NSW to QLD, NSW would have more relaxed Compliance laws etc then QLD would, i think........... :armsup:

Check but thats what i'm led to believe :D
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

So if i get the job i applied for in qld. It would be best to leave my rego at my parents address in sydney. Do i have no chance geeting my soa patrol passed for engineering up there?
Its not cool, unless it's got boost :)
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Mark Costello wrote:So if i get the job i applied for in qld. It would be best to leave my rego at my parents address in sydney. Do i have no chance geeting my soa patrol passed for engineering up there?


SOA is expressly prohibited in Queensland unless its factory :roll:
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

well queensland rules suck. Can they defect me if its still regestered in NSW.
Its not cool, unless it's got boost :)
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Mark Costello wrote:well queensland rules suck. Can they defect me if its still regestered in NSW.


Technically yes I believe they can. Ring them before you make a move because any advice but theirs is heresay ;)
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

sweat. i will give them a call.
Its not cool, unless it's got boost :)
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

If your car is registered and engineered in NSW then they cannot defect you if you are in QLD.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

SWEET!!!
Its not cool, unless it's got boost :)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Mark Costello wrote:SWEET!!!

You are only allowed to have it regoed in another state 3 mths, if you get caught, your anus gets reemed...

Qld have the tightest rules in the Cookie
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

bogged wrote:
Mark Costello wrote:SWEET!!!

You are only allowed to have it regoed in another state 3 mths, if you get caught, your anus gets reemed...

Qld have the tightest rules in the *****


Yes but there are plenty of ways around that is you want to keep it registered in NSW. You can claim you have 2 places of residence, or you change the truck into your parents name if they still live in NSW.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

In victoria it's 7 days to change your drivers licence and registration... not that it's really enforced but it's still scary.


Anyway we're talking NSW to QLD.

If you do get grabbed by the cops a couple of times and it's still registered in NSW they will ask questions unless you're living down the gold coast where it's the other side of town and it gets ignored. Remeber each time you get pulled over will go on record.

Normally you'd get away with driving on interstate rego for ages but SPOA cars stand out here a mile, especially if they have a few other bits of lift.

And if it's SPOA and visibly high you will get regular visits to the QLD blue light disco guaranteed if it's a daily driver.

In addition even if it's still engineered and registered in NSW when you get pulled, it better be EXACTLY in the spec it was engineered in or they can still get it put off the road. Ask Roc70Y....

And they can do it immediately if they want to be pricks since it's obviously unsafe to drive it all the way back down to sydney to be checked.


Remember that your engineers cert from NSW means absolutely squat when it's time to get it registered and engineered up here. That means all our fun rules about tyre size and body lift will affect you too.

However on the upside it's far easier to get an interstate registered vehicle registered here than you think - it only needs a safety certificate and a visit to your local DOT office. No need for full inspections unless engine number and chassis number do not match up, or there's a flag on your car for beings stolen or a repaired writeoff or something.
Posts: 7
Joined: Tue Jan 25, 2005 10:52 pm

Mods not allowed in QLD ???

Post by Templar »

I thought QLD was full of good 'Ol boys how come this anality about veh mods. Are they not allowed completly ???

I have a 4 in lift and 35 in tyres and will be moving from Syd to melb for 2 years then up to Sunshine coast to settle down. Done lift and diff change all myself ... do I need Eng Cert in NSW as well ??
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ISUZUROVER wrote:Yes but there are plenty of ways around that is you want to keep it registered in NSW. You can claim you have 2 places of residence, or you change the truck into your parents name if they still live in NSW.


true, I had my bikes regoed in Vic for 6 years while livin in NSW... saved me thousands on insurance and rego... Roly did the same.. but Qld fuzz and rules seem pretty harsh on the bustin people...
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

Mate of mine (actually on this board), his dad is a QLD DOT inspector, and he tells me if its engineered in NSW, and you bring it to QLD with SPOA, then you will get away with it.

It's the only way you can legally have SPOA in QLD apparantly.

He is pretty anal about these sorta details, so I would take his word for it. That said, wouldn't hurt to ring DOT and see what they say. I bet if you rang 3 times you will get 3 different storys :)
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

I wont be driving it every day, i will only driving it when going 4wheeling, so it wont be on the street much. If i join a club up there and just drive among them or a bunch of you guys if use go anywere and im aloud to tail along, it shouldnt be as obvious. Cause ill be with overs, not alone.
Its not cool, unless it's got boost :)
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

Mark Costello wrote:I wont be driving it every day, i will only driving it when going 4wheeling, so it wont be on the street much. If i join a club up there and just drive among them or a bunch of you guys if use go anywere and im aloud to tail along, it shouldnt be as obvious. Cause ill be with overs, not alone.



mite make it worse they may blitz u all in one hit to keep the qouta up !!

qld mod laws suck !

everyday police up here think there a master mechanic and suss out everything that dont look rite then wait for explanation whats it for !!!

had one querie me bout a flashing box and why it was in engine bay once..... ELECTRONIC RUST CONTROL BOX !!!!! there not real cluey ! ;)
just a little left of insanity :)
Posts: 744
Joined: Tue Dec 09, 2003 10:47 am
Location: Townsville.

Post by Fieldsy »

foad wrote:Mate of mine (actually on this board), his dad is a QLD DOT inspector, and he tells me if its engineered in NSW, and you bring it to QLD with SPOA, then you will get away with it.

It's the only way you can legally have SPOA in QLD apparantly.

He is pretty anal about these sorta details, so I would take his word for it. That said, wouldn't hurt to ring DOT and see what they say. I bet if you rang 3 times you will get 3 different storys :)


I got the same thing from QLD DOT a while back. they said if it was eng. and reg. in Vic or NSW for 2 years or more I could legaly have it reg in qld with a SPOA. I asked this because I am moveing to VIC for 2 years at the end of this year and my evil plan was to SPOA it in vic. drive it for 2 years then move back up here and transfer the rego over. but as said above I wouldn't be at all surprised if I was to ring DOT today and get a whole new story. because if you read the qld rules they contridct them selvs by saying that a SPOA is prohibited. but mods aproved in other aus states will be aproved if the vehicle was reg in the previous state for at least 2 years.
Team TAGATI

[quote="hottiemonster"]there seems to be a few people with quotes of mine in their sig, i guess i am just popular :D or just say some stupid things sometimes :lol:[/quote]
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

Post by damo lux »

What about for people who go interstate for work every couple of years like those in the armed forces?
Surely there must be exemptions other than taking out your 3'' body lift 35'' meats and SOA?????/
Posts: 251
Joined: Sat Mar 06, 2004 6:16 pm
Location: Melb. Victoria

Post by savage »

hate to be a no idea on the whole deal, but wat is a SPOA exactly...
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

Post by damo lux »

SPOA = Spring over axle, you take the leaf spring which is under neath the axle (think of a zook) and mount it on top of the axle (think of a lux)
Posts: 444
Joined: Sat Jan 11, 2003 7:29 pm
Location: SOR Perth

Post by roadrunner »

damo lux wrote:What about for people who go interstate for work every couple of years like those in the armed forces?
Surely there must be exemptions other than taking out your 3'' body lift 35'' meats and SOA?????/


The only exemption for the ADF is the rego transfer time limit. Normally you have up to 3 months ( i think ) once you move interstate but if you are a defence member you can wait for your rego to come up for renewal before you transfer it.

Everything else is as per normal, mores the pity :? :?
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
Posts: 367
Joined: Fri Jan 21, 2005 10:45 am
Location: Tasmania

Post by Tas_Dean »

damo lux wrote:What about for people who go interstate for work every couple of years like those in the armed forces?
Surely there must be exemptions other than taking out your 3'' body lift 35'' meats and SOA?????/


I've got a few mates in the Armed forces, and according to them you don't have to transfer your rego at all, apparantly there is a concession in place for them. I know this is true for their license, but I'm not sure about the vehicle rego!

An example, a mate of mine in the army had his car registered in Qld, his license in Tas, and was posted in NSW! A headache for the cops when he gets pulled up (imported r32 skyline!)

Cheers,
Dean
Posts: 744
Joined: Tue Dec 09, 2003 10:47 am
Location: Townsville.

Post by Fieldsy »

roadrunner wrote:
damo lux wrote:What about for people who go interstate for work every couple of years like those in the armed forces?
Surely there must be exemptions other than taking out your 3'' body lift 35'' meats and SOA?????/


The only exemption for the ADF is the rego transfer time limit. Normally you have up to 3 months ( i think ) once you move interstate but if you are a defence member you can wait for your rego to come up for renewal before you transfer it.

Everything else is as per normal, mores the pity :? :?


I have heard that but I haven't seen anything in writing so I would say thats a myth ADF come under the same rules as everyone else.

EDIT: the rules for licences are also the same. but If you do keep your rego in another state no one (in the ADF)will normally say anything ;)
Team TAGATI

[quote="hottiemonster"]there seems to be a few people with quotes of mine in their sig, i guess i am just popular :D or just say some stupid things sometimes :lol:[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 110 guests