Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rebuilding 3.5 engine

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

rebuilding 3.5 engine

Post by ranover »

hi all

since i have bought my disco i have been havin flashbacks of the good ol days in the rangie i once had.
have been tring to get my hands on a cheap one for a while. anyway i have had this 3.5 engine sitting in my garage for a while its all there just needs a rebuild and was wondering if any one has done it and if you have info on mods to do to it while its being done

also has anyone got an air flow meter for sale if so let me know cause mines stuffed
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

MMM 3.5 is just not going to cut it mate! Get rid of it and go bigger! :twisted: This is my opinion anyway. To get it rebuilt by the pros you might as well put the money towards a larger motor that may have a few k's on the clock.

Its really all about the buget! :cry: UNFORTUNATELY!
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

Best mod is fitting 3.9 bottom end, just get the heads rebuilt. :D
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

i found a bloke on here that was selling a 4.2 litre but now cant find him

also what about stroker kits is it worth doing or should you just buy a bigger engine
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

ranover wrote:i found a bloke on here that was selling a 4.2 litre but now cant find him

also what about stroker kits is it worth doing or should you just buy a bigger engine


I've got a 4.6 with 3.5 heads that I pulled out to fit a diesel.
John
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

I hope to get me hands on a 4.2 stroker block off a bloke in our club, but if that fails I wouldn't mind getting a 4.0 block. I'm not after all out power just some more revs and a bit more grunt.

After owning a Rangie with a 3.9 EFI I forgot how gutless the old 3.5 carby is :!:

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 16
Joined: Mon Sep 06, 2004 7:41 am

Post by green light »

Bush 65 were you selling your 4.6 and if so is it still okay or needing an overhaul. What are you after for it.
Sorry to change the topic guys.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

green light wrote:Bush 65 were you selling your 4.6 and if so is it still okay or needing an overhaul. What are you after for it.
Sorry to change the topic guys.


The 4.6 is for sale. Was running fine before I pulled it.

I swapped to a diesel to prepare rangie for long trips CSR etc. The poor fuel economy of the carbureted 4.6 and other advantages of diesel were why I changed.

The 4.6 was a new high compression, short motor that I bought from John Davis. It has a Dynotec cam, duplex roller timing chain, Bosh scorcher dual point dissy, extractors, Edelbrock performer inlet manifold, Quadrajet carbie and gear reduction starter. 3.5 heads were reconditioned before fitting to the short motor.

Motor has done about 40,000 km. Asking $2700 - location Swansea (south of Newcastle).
John
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

Aquarangie wrote:I hope to get me hands on a 4.2 stroker block off a bloke in our club, but if that fails I wouldn't mind getting a 4.0 block. I'm not after all out power just some more revs and a bit more grunt.

After owning a Rangie with a 3.9 EFI I forgot how gutless the old 3.5 carby is :!:

Trav
yeah my disco has the 3.5 efi engine in it was good at first but would love more power
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 12 guests