Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Trimming fuel tank lip

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Trimming fuel tank lip

Post by Hybrid »

Im attempting to put my lux tank between the chassis rails. It only needs about 3mm trimmed off it lenghtways to get it in there. Just wondering if theres anything I should worry about. The lip is about an inch wide and the mounting holes are between the edge I have to trim and the tank itself so I dont think I'd have any problems with causing leaks. It's been sitting empty for the last 2 years anyway.
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

sounds like it should be all good if the holes are between the edge and the tank then 3mm shoul be o.k :cool: :cool: :cool:
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 52
Joined: Fri Jan 03, 2003 3:01 pm
Location: Sydney

Post by JohnJohn »

Can you bend the excess lip out of the way with a pair of multi grips
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests