Hi eveyone,
I own a 97 Frontera sport, and in recent times i have been having troubles with my auto hubs.
There are serious micanical noises coming from the front end. Once the auto hubs have locked in they continue to make loud bangs every few feet, more noticible in 1st and 2nd low range.
Are the hubs stufed?
If this is the case can i fit manual locking hubs from MU or Rodeo to my Frontera Sport?. I
any feedback would be greatly appreciated.
thanks, Matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
auto hub problems
Moderator: Moderators
Welcome FrontyMatt. 
Check out the thread from the FAQ section.
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=26297
All Isuzu manual hubs are apparently interchangable across model. You may want to think about changing over to the manuals either way. It shouldnt be too expensive to pick up a set of Aisins from the wreckers.
Noel
Check out the thread from the FAQ section.
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=26297
All Isuzu manual hubs are apparently interchangable across model. You may want to think about changing over to the manuals either way. It shouldnt be too expensive to pick up a set of Aisins from the wreckers.
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
I'd also be checking the oil in the front diff, to see if there are metal peices in there.
Mine made the same noise and it ended up being the spider gears in the diff.... if that's what happened do what I did and install a locker.
Mine made the same noise and it ended up being the spider gears in the diff.... if that's what happened do what I did and install a locker.
Go hard or go home!!!
MU build here
MU build here
frontymatt.. i have a 95 frontera sports with auto's and they do make a heap of bangs but i am trying to get maunals , becuase every time you go in to reverse off road even if you are in 4wd they will unlock.. i get stuck on the beach every time.. The front hubs are the same as the TF rodeo as i have been told... Post some pics of your beast me wanna see!!!!
Hey frontie,
yeh sometimes it feels like the hubs silp and then re engage causing some nocks and bangs, always done it abit , but has become worse over time.
The other week at Stockton it was doing it every three meters, became almost un driveable!
TF rodeo you say, ill look in to it.
Got some pics 4 you.
yeh sometimes it feels like the hubs silp and then re engage causing some nocks and bangs, always done it abit , but has become worse over time.
The other week at Stockton it was doing it every three meters, became almost un driveable!
TF rodeo you say, ill look in to it.
Got some pics 4 you.
You do not have the required permissions to view the files attached to this post.
the knock in your hubs is a common problem in these cars the is a circlips inside the hubs that hold the cv's in i have come across this coming loose causing a knock when the hubs are locked.... the engagement of the hubs is control by a vacumm solenoid on the pass side on the fire wall make sure this is all ok the actuator is mounted on the pass side of the diff housing too.
Just thought I'd throw a pic in or two
You do not have the required permissions to view the files attached to this post.
Go hard or go home!!!
MU build here
MU build here
no................... been a little slow at the moment, but I'll get back into it soon.
Go hard or go home!!!
MU build here
MU build here
Yarn, thats some awsome flex you've got happening.....got me thinking a SAS 
frontie, sorry, but i cant say i know much about eletrics, i can tell you i run a deep cycle 100amp hour battery mounted behind the drivers seat in a battery box. and an isolator to control it.....and thats about as far as i can go
,Matt
frontie, sorry, but i cant say i know much about eletrics, i can tell you i run a deep cycle 100amp hour battery mounted behind the drivers seat in a battery box. and an isolator to control it.....and thats about as far as i can go
,Matt
Your best bet for a lift is to get custom coils,
Most aftermarket coils made for the car only get a lift from the increase spring rate over standard coils.
I bought Carrols coils which gave me 30mm lift,
now have OMEs which gave 40mm over standed hight.
When you compare the standard coils to the aftermaket ones they both measure the same hight ,Its only when they have the load of the car on them do the aftermaket ones give lift.
so i would recomend if you want a noticable increase get custom made ones.
when i looked in to this i was going to get 'Dobbison' ( i think that how you say it???) custom made coils. Around 2.5 inch over standard hight. and mathch them to long travel ProComp shocks. and then sway bar disconectors.
speek to a custom 4WD specialist about it ....they should be able to help out.
Cheers,Matt
Most aftermarket coils made for the car only get a lift from the increase spring rate over standard coils.
I bought Carrols coils which gave me 30mm lift,
now have OMEs which gave 40mm over standed hight.
When you compare the standard coils to the aftermaket ones they both measure the same hight ,Its only when they have the load of the car on them do the aftermaket ones give lift.
so i would recomend if you want a noticable increase get custom made ones.
when i looked in to this i was going to get 'Dobbison' ( i think that how you say it???) custom made coils. Around 2.5 inch over standard hight. and mathch them to long travel ProComp shocks. and then sway bar disconectors.
speek to a custom 4WD specialist about it ....they should be able to help out.
Cheers,Matt
Yer, i all ready got 35mm lift from a set of King Springs heavy duty and yer i noticed that they were the same high..... When i was looking in to coils all i could get around NEwcastle was the King's for $120 a set and customs around $350 so you can see why i get the king's...and i got a set of Cross Country 41mm bore foam cell 2inch long travel shocks.. and i will be making a quick discon front sway bar in my holis and taking the rear one out... thanks for the extra info....
my msn user email is mbucko35@hotmail.com
if ya use it .. it would be good to have a chat one time
my msn user email is mbucko35@hotmail.com
if ya use it .. it would be good to have a chat one time
Who is online
Users browsing this forum: No registered users and 0 guests