Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SNORKEL FOR GRAND VITARA
SNORKEL FOR GRAND VITARA
DOES ANYBODY KNOW WHERE I CAN GET A SNORKEL FOR A GRAND VITARA 2003 MODEL V6
Re: SNORKEL FOR GRAND VITARA
GVT03 wrote:DOES ANYBODY KNOW WHERE I CAN GET A SNORKEL FOR A GRAND VITARA 2003 MODEL V6
Suziworld 9459 8703 Mick or Ian
http://www.suziworld.com.au/
Suziworld Pty Ltd, 5/29 Culverlands Street, Heidelberg West. 3081 VIC Australia
Phone: +61 3 9459 8988 Fax: +61 3 9457 6385
Last edited by christover1 on Thu Jan 13, 2005 8:59 pm, edited 1 time in total.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
GVT03 wrote:IS THE GREEN ONE WITH A AIRFLOW, DID HE HAVE ANYPROBLEMS WITH MOUNTING IT.
I believe that its an Airflow, he got it from suziworld.
I haven't heard of any fitting probs, but if ya join our yahoo group, you could speak to him about it...His name is Andrew W.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
PRZOOK wrote:I have seen a side on shot of the green one, and the snorkel doesn;t follow the line of the car I believe.
From what I have heard, a hilux snorkel has been installed on a GV by Overkill. Care to comment on that Sam?
I couldn't be sure, never looked that closely.
But I imagine following the line of the car is probably important, because if it didn't the door would hit it, or open bonnet would hit it, too.
I haven't heard of this happening, yet, but will ask around and look more closely.
I personally would get exactly the shape you want from an exhaust shop made snorkle.
I will try to find a more side on set of pix.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Rotazuk wrote:Ok , any idea why I can't see the pic's
no idea? werks here...send me an email kristovr@bigpond.net.au if you want I can email them to ya...christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
there is also ones made by Roca Silva in Almeria in Spain
but it doesnt come cheap costs about £535 delivered
www.rocasilva.com or info@rocasilva.com
There is a small problem on Right Hand Drive vehicles as the antenna on LHD GVs is on the LHS and on RHDs is on the RHS. The snorkel covers the area where the antenna comes out - so you might need to put an electronic antenna. however they know there is a problem and they might adjust the mould for you this time round.
There is another small problem when you install the inner wing part you have to hammer the 'top hat' bracket for the old air intake flat to allow the wing to fit back on (really easy but worth knowing and feels a bit brutal but will straighten out if you ever wanted to go back for any reason) The hole in the wing is 76mm and needs a hole saw which is hard to find - most are course toothed. Finally you drill 2 3mm holes in the roof panel to hold the the snorkel in position.[/img]
but it doesnt come cheap costs about £535 delivered
www.rocasilva.com or info@rocasilva.com
There is a small problem on Right Hand Drive vehicles as the antenna on LHD GVs is on the LHS and on RHDs is on the RHS. The snorkel covers the area where the antenna comes out - so you might need to put an electronic antenna. however they know there is a problem and they might adjust the mould for you this time round.
There is another small problem when you install the inner wing part you have to hammer the 'top hat' bracket for the old air intake flat to allow the wing to fit back on (really easy but worth knowing and feels a bit brutal but will straighten out if you ever wanted to go back for any reason) The hole in the wing is 76mm and needs a hole saw which is hard to find - most are course toothed. Finally you drill 2 3mm holes in the roof panel to hold the the snorkel in position.[/img]
GV Snorkel
the only snorkel on the market in Aus that fits all GVs is at
outdoorauto.com.au
http://stores.ebay.com.au/Outdoor-Auto
outdoorauto.com.au
http://stores.ebay.com.au/Outdoor-Auto
www.outdoorauto.com.au - we love doing new GVs....
Who is online
Users browsing this forum: No registered users and 9 guests