In regards to my zook losing oil from the box due to no seal, there must be a way to modify the selector hole to stop this problem. I know im not the only one.
I dont want to change the box for a later one either, has anyone modded their early zook box to eradicate this problem?
Also does anyone know if its possible to drill and tap a second breather into the top of the box? Then i could just fabricate a quick seal for the selector.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GEARBOX OIL PART II
GEARBOX OIL PART II
1985 LWB Suzuki Sierra, Lock-Rite Rear, SPOA, 2" Body Lift, Climax shackles, Rancho's,
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
what do you mean by second breather? the breather is via the gear shifter i thought. I'm going to install a proper breather more forward of the stick and seal off the selector as much as posible allowing the box to breather whilst going up hill instead of the heated oil trying to escape through the insufficent breather/gearshift. i believe this should if nothing more slow the oil exiting by heaps . in Caterpillar dozers you find it near impossible to remove the hydraulic filler cap (when hot) without oil spewing out everywhere and it doesnt matter how slow you attemp to remove it , its just the only exit for the hot air and when the air tries to exit it vacuums the oil to go with it , simply because there is no breather on caterpillar hydraulic tanks . anyways sorry to ramble pn ill have mine done in about 2 to 3 weeks and ill let you know . i'd do it sooner but im doing a spring over this weekend .
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
when i said second breather, i actually meant, seal the selector up, and then drill and tap another breather elsewhere, i.e. further up on the box.
1985 LWB Suzuki Sierra, Lock-Rite Rear, SPOA, 2" Body Lift, Climax shackles, Rancho's,
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Series 1 Rockhoppers, 31x11.5 MT'S, "To return from the dead very sooooon!"
[url]http://www.cyberdesigns.tk[/url]
[url]http://www.purefmx.tk[/url]
Who is online
Users browsing this forum: No registered users and 72 guests