Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ifs - pros and cons

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 22
Joined: Tue Sep 28, 2004 8:59 pm
Location: northcoast

Post by Rob e Gee »

There seems to be a bit of confusion between ,..and the ability of both......ground clearance and articulation...

All things equal....A 4 inch suspention lift will give an .IFS vehicle 4 inches more ground clearance at the front.....It willgive a live axle vehicle absolutly no more ground clearance because the diff housing doesnt rise....giving ..IFS..an advantage in some situations..EG..very soft sand, mud etc.......BUT IT GIVES a live axle much more....articulation....which gives it the advantage in cross axle situations...

Its a shame I coudnt find the ...thread... on THAILAND!s IFS army vehicles. ;) ..they are something special ( mitsu...tritan ) masive ground clearance and huge tires... :P
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

Good point but the lower control arms remain the same height.
Patrolmad
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

ifs

Post by DR Frankenstine »

garyinoz QUOTE:The point I was making is that IFS have varying amounts of clearance and basically fixed travel vs fixed clearance and variable flex of beam axles, and that they require different driving styles. It is not a matter of being able to jump out of one into the other and adoptng the same strategies. I was using my own vehicle to demontrate a point as I already had the figures for it.

ALSO:and also has the ability to increase the clearance momentarily (in my case up to about 17" -> equal to 44" tyres!) by the addition of a bit of right foot.

I think never actually knowing how much clearance you have could be dissasterous. Not to mention a pain in the arse.

LIKE Oh am I going to clear that rock in the middle of the track?
Oh i know ill accellerate that will help me clear!
CRUNCH der: wheres all that oil coming from?

FAIR DINKUM
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Re: ifs

Post by Utemad »

DR Frankenstine wrote:I think never actually knowing how much clearance you have could be dissasterous. Not to mention a pain in the arse.


As with any vehicle after driving it for a while you get to know its downsides and upsides and drive accordingly. You also get a feel for where things are around and beneath it and what your suspension is doing.

As I'm sure we all know.

Gotta love this thread :lol:
Land Rover Discovery series 1 V8
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

IFS are for the beach, general outback dirt road touring, and the bitumen road and thats all. Thats fine if that's what you do but they are not for seriouse terain.
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

???How many ifs owners have owned a live axle???
???How many live axle owners have owned a IFS???
I know Ive had an IFS and would not go back, well maybe when i'm an old man :lol:
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

ifs

Post by DR Frankenstine »

a mate of mine traded his older beam hilux on a IFS 3.0l hilux! He used it offroad a few times and then spent thousands of dollars converting it to beam axle. He can now fit on his 36" super swampers :roll:
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Post by Utemad »

Why is it people try and convert others to their own point of view.

If you are an IFS person ask yourself if you will be converted by a solid axle guy giving his point of view on this forum or vice versa.

Having said that it is always funny to read a thread like this :lol:
Land Rover Discovery series 1 V8
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

bruiser wrote:IFS are for the beach, general outback dirt road touring, and the bitumen road and thats all. Thats fine if that's what you do but they are not for seriouse terain.




maybe you should inform these guys of that !!!!!!

http://www.outerlimits4x4.com/PHP_Modul ... sc&start=0
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Posts: 22
Joined: Tue Sep 28, 2004 8:59 pm
Location: northcoast

Post by Rob e Gee »

The heading on this page reads (...pros and cons of IFS.????) ...... meaning..... :idea: :idea: :?: ..... All information greatly excepted :P

Remember this.....A little bit of education is on burden to carry..

I am shore we all have our own stories to tell of why we prefer one system over the other.. but I am not real sure about the (...REAL SERIOUS STUFF...)..... does geting stuck in a rut due to less wheel travel be any more serious than being bogged to the axles in powdery sand behind Indian Head on Frazer.. with a burnt out clutch......VERY serious and very EXPENSIVE.

Coil spring live axles are very good....but just stand in front of a 60 series cruser and take a good look at how much ground clearance you dont have with under slung leaf springs ...... BUT... dont get me wrong.... I think the ..60 series is one of the most honest and solid 4x4s going... but for me now after ...rockies. forruners .mq,s and 60 series the PAJ.. fits the bill just fine. :D :armsup:
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

grumpy221 wrote:
bruiser wrote:IFS are for the beach, general outback dirt road touring, and the bitumen road and thats all. Thats fine if that's what you do but they are not for seriouse terain.




maybe you should inform these guys of that !!!!!!

http://www.outerlimits4x4.com/PHP_Modul ... sc&start=0


Err :oops: Umm :oops:

The first pic in the link, Bitsa's Jabber, now has a SAS conversion. :oops:

I'm not gonna try to argue that IFS can keep up with beam axles in all terrain. But a well set up IFS vehicle will surprise a lot of the "beam axle" brigade. You need to be a VERY hardcore tourer to find somewhere that a current model Paj (OK, they come with traction control, and give it some real tyres!) won't go.

Most people on this board will find IFS a limitation. For "normal" people it won't make that much difference off road, and they do drive a shit-load better on road. Those that want to argue otherwise must have had a crap IFS vehicle and a good live axle vehicle - 'cause basic physics (and every manufacturer of 2wd passenger vehicles in the world) disagrees with you. :finger:

Scott
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

100 series Cruisers must be crap then (I agree) as mine broke off a lower control arm due to corrugations and the front wheel and suspension components fell off totally ripping off brake lines etc. Luckily i was only doing 60 km/h otherwise I mightn't be writing this thread. Overall a $12,000 repair and rescue bill due largely to the location of the incident and the cost of Toyota parts. Never had this problem with the 5 live axle Patrols I owned. Explains why the 100 series was traded on a GUIII immediately afterward. Also dispute your article about the capabilities of the Pajero as in the yard where my 100 was trucked to was a 2004 Pajero with a very similar problem. Also explains why the Oodnadatta police drive live axle Patrols and Cruisers as do most outback residents and travellers!!!!!!!!!!!!
Patrolmad
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

patrolmad wrote:100 series Cruisers must be crap then (I agree) as mine broke off a lower control arm due to corrugations and the front wheel and suspension components fell off totally ripping off brake lines etc. Luckily i was only doing 60 km/h otherwise I mightn't be writing this thread. Overall a $12,000 repair and rescue bill due largely to the location of the incident and the cost of Toyota parts. Never had this problem with the 5 live axle Patrols I owned. Explains why the 100 series was traded on a GUIII immediately afterward. Also dispute your article about the capabilities of the Pajero as in the yard where my 100 was trucked to was a 2004 Pajero with a very similar problem. Also explains why the Oodnadatta police drive live axle Patrols and Cruisers as do most outback residents and travellers!!!!!!!!!!!!


Was your 100 series the one pictured in the Letter part of 4wd Monthly?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Post by Nev62 »

MKPatrolGuy wrote:
patrolmad wrote:100 series Cruisers must be crap then (I agree) as mine broke off a lower control arm due to corrugations and the front wheel and suspension components fell off totally ripping off brake lines etc. Luckily i was only doing 60 km/h otherwise I mightn't be writing this thread. Overall a $12,000 repair and rescue bill due largely to the location of the incident and the cost of Toyota parts. Never had this problem with the 5 live axle Patrols I owned. Explains why the 100 series was traded on a GUIII immediately afterward. Also dispute your article about the capabilities of the Pajero as in the yard where my 100 was trucked to was a 2004 Pajero with a very similar problem. Also explains why the Oodnadatta police drive live axle Patrols and Cruisers as do most outback residents and travellers!!!!!!!!!!!!


Was your 100 series the one pictured in the Letter part of 4wd Monthly?


If it was yours, did you end up getting any compensation from yota for the crappy design with no bottom bumpstop :?:
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I believe the Gen 3 Pajeros suffer the same problem - the shockabsorber is the bump stop for droop, which is the silliest idea I've heard for some time. Earlier models have top and bottom stops on the chassis.

Cheers,

Scott
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

I did see that but it wasn't mine. Mine looked exactly the same with the only difference being mine still had original suspension so they could not pass the blame onto ARB. Nice job hey? No compo at all. They put the blame onto me instead saying that the vehicle is not designed for off road work. This has been their cry with many 100 IFS owners I have spoken to. I hope Nissan keep their head together and continue to produce the live axle.
Patrolmad
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Post by Nev62 »

patrolmad wrote:I did see that but it wasn't mine. Mine looked exactly the same with the only difference being mine still had original suspension so they could not pass the blame onto ARB. Nice job hey? No compo at all. They put the blame onto me instead saying that the vehicle is not designed for off road work. This has been their cry with many 100 IFS owners I have spoken to. I hope Nissan keep their head together and continue to produce the live axle.


Nice one yota :? How the hell do you sell a Landcruiser after all the ads and say "its not designed for off road" I would be having a talk to a leagle beagle and getting this out to as many current and protential 4wd owners as possible :bad-words:
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Nev62 wrote:
patrolmad wrote:I did see that but it wasn't mine. Mine looked exactly the same with the only difference being mine still had original suspension so they could not pass the blame onto ARB. Nice job hey? No compo at all. They put the blame onto me instead saying that the vehicle is not designed for off road work. This has been their cry with many 100 IFS owners I have spoken to. I hope Nissan keep their head together and continue to produce the live axle.


Nice one yota :? How the hell do you sell a Landcruiser after all the ads and say "its not designed for off road" I would be having a talk to a leagle beagle and getting this out to as many current and protential 4wd owners as possible :bad-words:


Tell Scruby, he could do us all a favour, not to mention embarrass the hell out of Toyota :twisted: :twisted: :twisted:
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 88
Joined: Tue Nov 23, 2004 10:57 am
Location: melbourne

Post by bradley »

Hey i love my jack, ifs and all, its got good artic in the rear solid which helps heaps , top and bottom bumpstops, manual hubs so i dont flog out cvs and boots . Some early 90's t/d jack chassis had faulty welds around the steer box mount, nothing to do with ifs, there are no major probs with the jacks, the ARB kits are for the toyo's plastic front arms. yep toyo ifs ia an absolute discrace.

Hey i guess all those victories in aus safari / finke etc in modified and showroom class mean the jacks are fairly soft :roll:
Posts: 249
Joined: Mon May 26, 2003 9:37 pm
Location: brisbane

Post by greenhilux »

I own an IFS lux, not to blow my own horn, but i'd say its one of the tuffest around. I can say it satisfies all my offroad desires. I could also very safely say that if it was compared to a live axle lux with the same mods as mine, the live axle wouldnt go anywhere tha mine couldn't.
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

Don't know what these photo's are supose to prove.
To me it shows exactly what hapens when you lift a ifs vehicle to accomodate larger rubber.
You end up with zero flex and airbourne wheels left right and centre. Locckers can help overcome this but not always. Youve still got loss of traction.
( the wheels in these photos are lucky to have flexed an inch.)

http://www.outerlimits4x4.com/PHP_Modul ... sc&start=0
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

bruiser wrote:Don't know what these photo's are supose to prove.
To me it shows exactly what hapens when you lift a ifs vehicle to accomodate larger rubber.
You end up with zero flex and airbourne wheels left right and centre. Locckers can help overcome this but not always. Youve still got loss of traction.
( the wheels in these photos are lucky to have flexed an inch.)

http://www.outerlimits4x4.com/PHP_Modul ... sc&start=0
:roll: its all about havin fun
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yeah about one inch.......................... :D

Image

About an inch and a half for this one.................... :D

Image
I just luv my "clacker Jabber"
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

:rofl: to all the knockers BEEN TOLD LATELY :rofl:



nicc pics bitsamissin :armsup:
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Another 4by without wheel travel...
Image
Posts: 614
Joined: Tue Jul 27, 2004 7:47 pm
Location: Penrith

Post by UZJ40 »

in the past i always had Hiluxs, non IFS, and had a very anti IFS attitude.

untill my 40 is on the road i am using my wifes old Surf. It has a 4" lift kit and 33" muddies on it.

i must say how impressed i am with it, it never ceases to amaze me where it will go.
HoldFast RocKrawlin
Posts: 197
Joined: Tue Jan 04, 2005 9:52 am
Location: Brisbane

Post by patrolmad »

Come on mate. You call that wheel travel??????????
Patrolmad
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Compared to what can be achieved with a solid axle, no. But it is a bit more than "an inch." :?

Cheers,

Scott
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Good on you Frank & Scott
J Top
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

took me a while to read this whole thread.... was funny actually....... because the S/A guys will not and cannot be told any different to what they firmly believe. Utemad said it right when he said people know the limitations of their fourbys and drive accordingly. Having said that, lock the front diff in an IFS vehicle and it will go most places... and i mean MOST places a S/A will go. And lets not confuse the weakness in the hilux IFS front diff with everybody else...... i don't know of many other IFS vehicles having front diff problems asside from the hilux. My Deo has about 4" of lift overall, body and suspension, i think about 5" in the rear making it "almost" as high as a standard hilux :oops: a diff lock in the front, and IFS or not, it goes a lot of places that people say "you can't take an IFS fourby there!!" High N Mighty has seen my car in action..... make the ass end flex, put a diff lock in the front, and you'll go much much further than the S/A boys give you credit for. I often lift a wheel, but i can still do the track, flex is nice, but it's not everything. Sure, if you want to do extreme off-road stuff, then you can get the height out of a S/A vehicle..... but a lot of rough stuff can also be done by just about all fourbys....... it's not always the car, but the loose nut behind the wheel ;)
There is no "I" in Team, but there are 5 in Individual Brilliance
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests