Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux steering problem

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 63
Joined: Fri Feb 20, 2004 4:10 pm
Location: Melbourne

Contact:
Contact djmickyg

hilux steering problem

Post by djmickyg »

Ive got a real loose ball joint on some arm (don't what this arm is called so i will post pics) which is giving me alot of steering play.
but i cant figure out how to remove it.

here is the pics of it.

Image
Image
Top
Posts: 196
Joined: Wed Jan 28, 2004 11:18 pm
Location: liverpool, western sydney

Post by Barney7779 »

pull the split pin out of the slot in the end and use a big flat blade screw driver to turn the center out then wiggle it around and it will pop out

or just take the split pin out and use a flat blade screw driver and give it a turn or two untill you think it is tight and replace the split pin


Problem solved
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

what he said :cool: :cool: :cool:
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 63
Joined: Fri Feb 20, 2004 4:10 pm
Location: Melbourne

Contact:
Contact djmickyg

Post by djmickyg »

thanks..

i already did try this but my screw driver must have been big enuf, cus nothing turned, or maybe im just weak.

i will get some WD40 on it i thinks..

and what was this thing called?
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

djmickyg wrote:thanks..

i already did try this but my screw driver must have been big enuf, cus nothing turned, or maybe im just weak.

i will get some WD40 on it i thinks..

and what was this thing called?


drag link ;)
Top
Posts: 63
Joined: Fri Feb 20, 2004 4:10 pm
Location: Melbourne

Contact:
Contact djmickyg

Post by djmickyg »

drag link, that sounds fast

i tried it again.. i took out the split pin and tried to turn the end using the grove the split pin was in and nothing.. didnt even budge a little both ways?
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

djmickyg wrote:drag link, that sounds fast

i tried it again.. i took out the split pin and tried to turn the end using the grove the split pin was in and nothing.. didnt even budge a little both ways?


yeah i had the same problem before i went cross over.

try getting some vice grips onto the screw drive. that might help ;)
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

just check and make sure its not the other end that maybe lose cause both ends can be loose

very stupid toyota steering system they should all come out x-over to start with :) :) :)
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

maybe the ball on the j-arm or pitman arm is buggered. I know my j-arm had a worn ball. Got 2nd hand one from wreckers and all was good
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Put a cresent on the flats of the screwdriver and work it to & fro.
Those balls can come loose in the J arm and stg box drop arm as well.
J Top
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 1 guest