Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ive got a real loose ball joint on some arm (don't what this arm is called so i will post pics) which is giving me alot of steering play.
but i cant figure out how to remove it.
i tried it again.. i took out the split pin and tried to turn the end using the grove the split pin was in and nothing.. didnt even budge a little both ways?
i tried it again.. i took out the split pin and tried to turn the end using the grove the split pin was in and nothing.. didnt even budge a little both ways?
yeah i had the same problem before i went cross over.
try getting some vice grips onto the screw drive. that might help