Custom tray Brisbane

[mudlux]

I'm trying to find a place that will build a custom tray for me in Brisbane, any one know of a good place to get one done?

[eliteforce32]

haul tec, superior engineering those sort of places mate

[Aza]

i would say easiest way would be to build it urself, or ur local 4x4 store if they do custom work (i.e. extreme 4x4 at browns plains). as long as u no how to weld, building it urself would be the best option

[phippsy]

If you prepared to have a go, do it yourself. I'm halfway through mine, sure there's a couple of things I'd like to do different but it's too late now. I don't mind mine not being perfect, but it's good to practice/learn to weld and do it yourself, plus it's a heap cheaper.

[BIG GQ]

You could approach Buddy (bubs) and see if he is willing to do another one. He did a top job on mine and the price was right to.

[mudlux]

I don't trust myself!!!
What about On track 4wd at springwood has anyone had a tray made by them before? I'm after a tray similar to the red 78 series ARB southside ute if you have seen it.

[Aza]

where ever u go i bet it will be expensive, as link said bubs might be willing to do another one, int too sure at the moment as he is trying to get his finished, he was the one who built mine as well, and i got mine very very cheap (cheaper than link, but im family )

[benhl]

When i did my research redlands 4wd told me about this guy

2D Extreme Mods (Dale Kethers 0407 837 074)

I rang him and he said between 1 and 2k. depending on what you want. Apparently he has done some top jobs, try him if only for ideas!!

[Aza]

between 1 and 2k , i paids less than 200$ for mine, if u did it urself i would expect to pay about 500$ though, do u have a mate who can weld?????

[mudlux]

I do have access to a welder and a nice big shed just don't have time to do it. Got some good ideas just need someone to build it for me.

[ditch]

i have nil experience in welding but im gonna give it ago myself, materials (if you check my other thread) shouldnt cost much more than $300 - $350. so yea, ur obviosuly gonna be saving ALOT of money if you go DIY. i mean u obviosuly do some prac before yyou jump into making the tray, cant be too hard eh

[bubs]

I do have access to a welder and a nice big shed just don't have time to do it. Got some good ideas just need someone to build it for me.

call me on 0417 708 598 and we should be able to work something out

[mudlux]

Bubs
Have u seen the ARB southside red 78 series tray at all? I'm after something similar to that or one similar to Tony Ryans GQ extra cab, there is a pic of it under custom tube trays.

[bubs]

can you link the pic from this thread to this one, i dont know which ones tony ryans'

http://www.outerlimits4x4.com/PHP_Modul ... tube+trays

[mudlux]

It's the white gq extra cab with a dark green roll bar, silver checker plate floor, mickey thompson tyre sunk into the floor of the tray and a ground anchor sticking out.

[bubs]

This one, can do tube style like that

[mudlux]

What sort of price would I be looking at bubs? also I need my arb bull bar and side steps lifted to suit 2 inch body lift can u do that? It's for a 75 series yota. I don't want the tyre sunk into the tray just a flat deck with drop down sides (removable)? colour coded blue bars with checker plate floor, if that makes sense?

[bubs]

Call me on the above number

[beebee]

You're going to have fun trying to build drop sides around curved tube side rails

If buddy cant help you out, we may be able to sort something out. Although we're very busy at the moment with 1 hilux exo, 2 suzuki exos with front and rear bars and sliders, another suzuki exo, sliders and rear bar, plus a hilux front bar. And unfortunately, mine comes first

[rastus]

AMT welding at jimboomba will do that tray and he is very good and well priced and he also dose bar work and just about anything else.