anyone know of different diff housings that are slightly wider than the stocko 60 series???
Am thinking of Patrol so I can convert to coils and have rear discs too. I know anything is possible with the right $$$. Just after some info so I can do a bit of research for future mods.
Cheers,
Brighty.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series diff conversion
Moderators: toaddog, TWISTY, V8Patrol, Moderators
60 series diff conversion
When in doubt..... UTE-ERIZE it!!!
you can winden your existing rear by using 80 series spindles, and get disk brakes by using the 80 series disks etc, need to fabricate brackets though I think.
on the front it should be possible to do the hilux IFS hub conversion.
alternatively you could get a set of 80 series axles complete and sling them under there. If you want to go patrol then you'll need to get GU axles to go up in strength from the 60 series gear.
on the front it should be possible to do the hilux IFS hub conversion.
alternatively you could get a set of 80 series axles complete and sling them under there. If you want to go patrol then you'll need to get GU axles to go up in strength from the 60 series gear.
Free air locker to the first 20 callers!
dumbdunce wrote:you can winden your existing rear by using 80 series spindles, and get disk brakes by using the 80 series disks etc, need to fabricate brackets though I think.
on the front it should be possible to do the hilux IFS hub conversion.
alternatively you could get a set of 80 series axles complete and sling them under there. If you want to go patrol then you'll need to get GU axles to go up in strength from the 60 series gear.
Have already looked into the 80series + hilux IFS conversion stuff. Still not sure what to do, hence why I'm asking about patrol stuff instead. Considering all options......
Can anyone tell me, is the GU track width wider/skinnier than the 60 series cruiser???
When in doubt..... UTE-ERIZE it!!!
Who is online
Users browsing this forum: No registered users and 3 guests