Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hillbilly Welded Diff AND How Long Before it breaks....

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply

How long before my premium hillbilly locker breaks ?

First Trip (this weeend)
11
31%
3 Months
5
14%
6 Months
5
14%
1 year
4
11%
+ 2 years
10
29%
 
Total votes: 35

Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Hillbilly Welded Diff AND How Long Before it breaks....

Post by MY45 »

Just thought id post a pic of the diff that i just welded up for glen1n......A plate was cut out to fit between the gears and then was welded all around, i also welded a few of the teeth up as well :armsup:
You do not have the required permissions to view the files attached to this post.
Last edited by MY45 on Fri Feb 25, 2005 8:56 pm, edited 1 time in total.
----HillBilly Engineering----
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

Ah wondered were team hillbilly have been
gettin ready for a big weekend ah?

Need to set a poll on how long before it breaks :D :D
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

just gotta weld up his tail shaft now and he'll be right :armsup:
Yurich Design Services
www.yds.net.au
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Tidy42 wrote:Ah wondered were team hillbilly have been
gettin ready for a big weekend ah?

Need to set a poll on how long before it breaks :D :D


Done :D
----HillBilly Engineering----
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

just welded my mates one as well and put more layers than that right into the teeth,its more the teeth breaking from weld than the weld breaking or cracking
I voted for 6 months and I bet his tyres will be bould before it breaks
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

4sum4 wrote:just welded my mates one as well and put more layers than that right into the teeth,its more the teeth breaking from weld than the weld breaking or cracking
I voted for 6 months and I bet his tyres will be bould before it breaks

He has another open centre to swap in for onroad :D
----HillBilly Engineering----
Top
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

Ive got no idea how long it will last but i voted for 1 year
Top
Posts: 135
Joined: Wed Feb 16, 2005 11:50 pm
Location: Western Australia - Margaret River

Post by ToyTruck »

did you preheat the spider gears with an oxy torch before welding??????

if you did .... it will last longer than the axles!!!!

:armsup: GO THE C.I.G. LOCKER :armsup:
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=40976]ToyTruck[/url] is GONE ..... Time to build a BUGGY
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

if you weld the side gears to the carrier they never break.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

brad-chevlux wrote:if you weld the side gears to the carrier they never break.


No but the carrier usually does.

Looks fine to me and i voted 2Years+ I cant see that ever breaking. If you are running it in the rear th easiest(Not Safest) way to run it on the street is with one axle removed. Just remove the long side axle and put a short side in there to seal it all up.
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

RUFF wrote:
brad-chevlux wrote: Just remove the long side axle and put a short side in there to seal it all up.


Just use an axle that has snapped clean away from the part that connects to the hub, i always had one in my truck ready in case
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Monty wrote:
RUFF wrote:
brad-chevlux wrote: Just remove the long side axle and put a short side in there to seal it all up.


Just use an axle that has snapped clean away from the part that connects to the hub, i always had one in my truck ready in case


Damm people with full floaters... nice weld job :D
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

looks good. id say that the gears will break before the welds.....
or the axles will snap :roll:

not bad ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

guess it all depends on if its running horizontally or vertically at the time it breaks :)
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

well you didn't break it last night

but then again you drove like a pussy :finger:
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

STUMPY wrote:well you didn't break it last night

but then again you drove like a pussy :finger:


I noticed he didn't drive the hill Hypos old man did a massive wheely on :roll: :finger:
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Shorty40 wrote:
STUMPY wrote:well you didn't break it last night

but then again you drove like a pussy :finger:


I noticed he didn't drive the hill Hypos old man did a massive wheely on :roll: :finger:


Hahaha he must of been a bit nervous after his little accident :D
You do not have the required permissions to view the files attached to this post.
----HillBilly Engineering----
Top
Posts: 876
Joined: Wed Apr 14, 2004 7:30 pm
Location: Terrigal, NSW

Post by fightara »

MY45 wrote:
Shorty40 wrote:
STUMPY wrote:well you didn't break it last night

but then again you drove like a pussy :finger:


I noticed he didn't drive the hill Hypos old man did a massive wheely on :roll: :finger:


Hahaha he must of been a bit nervous after his little accident :D


You'd think he'd be used to it by now :D
How many sleeps has it been for Larry?
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

strangely enough i lost my brakes in pretty much the same spot
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I can see this thread heading towards an axe so Please keep this on topic about welding a diff centre.

Read this if I am sounding a bit harsh to you http://www.outerlimits4x4.com/PHP_Modul ... hp?t=33838
Top
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

+dj_hansen+ wrote:
Monty wrote:
RUFF wrote:
brad-chevlux wrote: Just remove the long side axle and put a short side in there to seal it all up.


Just use an axle that has snapped clean away from the part that connects to the hub, i always had one in my truck ready in case


Damm people with full floaters... nice weld job :D



whats a full floater? :? :?:
indubitably
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Axels that can be removed with out taking anything else but the axle nuts off :D
----HillBilly Engineering----
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Its beautiful dude :D It'll last forever!!!!
Where the f#@k did that come from
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 95 guests