Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

power windows

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 29
Joined: Wed Oct 29, 2003 3:39 pm

power windows

Post by dscott »

Just purchased a 1992 gq ,both rear power windows are rooted they barely move.Are they easy to fix and any idea how much it would cost,i will have a go myself.
Top
Posts: 101
Joined: Sat Feb 19, 2005 8:20 pm
Location: Logan City, Qld.

Post by Ingenious-Eng »

Silicon spray down the slides helps but if that don't work off comes door trims for a better looksee!
Cheers
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: power windows

Post by bogged »

Has been discussed in the last week or 2, try searchin for it.. was some good info
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

The switch contacts can gum up with crud if not used regularly, and the leccy motors/gear mech as well. The motors and gearbox are easy to pull apart, reassembly is a bit harder, as the brushes willjust need to be held away from the rotor etc. Good clean and some quality grease - Nulon Xtreme teflon is great. Don't forget all the linkages need lube also, moly grease for this.
Built, not bought.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 111 guests