Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Shaft Spacer ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Tue Jul 22, 2003 1:42 pm
Location: Brisbane, QLD, Australia

Front Shaft Spacer ?

Post by Speedman »

Hi Guys,

I have a 90 lux with a fair bit of lift (2" body and ??" suspension). The front drive shaft is pretty loose (its the std one), and when the car is level, it's showing about 8mm of the spline. I'm assuming I need more travel downwards than upwards ? Question is, where does your shaft normally sit when the car is level ? Does any of the spline normally show ?

I'm thinking I need an approx 10mm tailshaft spacer to help this ?

Cheers.
Top
Posts: 477
Joined: Tue Sep 16, 2003 4:51 pm
Location: Canberra

Post by Slayer »

mine used to show bout 10 mm of spline, i got it lengthened and rebalanced.. spacers are ok if u only need a little bit, but id sugest getin it resized.... if its that far short and u have longer than std shocks and a fair bit of flex it might drop out when wheelin.. not good!
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

I'll make one up for you if you need one. Will make to any custom size. 10mm - 25mm $80. Give us a call as I don't get on the net much.
Ph. Aaron 0407276979 :lol:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests