Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

servising question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 108
Joined: Mon Aug 16, 2004 3:01 pm
Location: brisbane

servising question

Post by gavinc »

while servising my 2.8 luxs today i went to check my gear box level and found that there was a hose that ran from my t/case check/fill plug to my gear box check/fill plug but it says nothing about this in my servise manual now wtf is that doing there should it be there ive only stared to do the servising my self i can take a pic if that would help
cheers gavin
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

it sounds like your gear box and t case seal is leakin gand instead of repairing it they just ran a hose to keep the levels even between them
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

Its called a ballance tube its for when the seal in the transfer that seperates it from the g box leaks.
due to all the oil [generally] running from the g box to the transfer the balance tube will some how from a lower point on the transfer supply the g box filler plug at a higher point .
Really good if u do alot of down hill driving ,basically a bandaid for a leaking seal
Posts: 108
Joined: Mon Aug 16, 2004 3:01 pm
Location: brisbane

Post by gavinc »

so it is allright to have this i shouldn"t be looking to get the inner seal fix
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

what hapens is the seals wears and the oil from the t-case runs into the g-box while driving and emptys the t-case ..
but the seal stop the oil running back into the t-case while stoped.
'so u fit a level pipe to let the oil back into the t-case.

problem fixed .

leave the pipe in place .
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

Many people run it
but my view is how does any fluid run up a incline.
only way to fix it properly is bye replacing the seal
Posts: 32
Joined: Thu Feb 17, 2005 7:39 pm
Location: Sydney

Post by Major60 »

The seal is worn and this is usually caused by the shaft wearing. Replacing the seal usually means that the new seal will leak farily soon. So it means replacing the shaft the seal is sealing or repairing with a speedy sleeve maybe.

Accept the leak and leave the tube on. They work fine for years and much easier than changing the seal and fixing the shaft.
Posts: 108
Joined: Mon Aug 16, 2004 3:01 pm
Location: brisbane

Post by gavinc »

ok i think that i will leave it where it is now what about when i have to change the oil in the box and t/case what do do there do as normal :?
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

Leave it..It's a cheap effective fix to an expensive problem.
Ran one for yeeeaaarrs and my wallet loved it.
www.3rdrock4x4.com
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest