Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Beefing up the Transfer Case
Beefing up the Transfer Case
Seeing what I have planned for my project the only stock part of the drivetrain looks to be the T/C. I remember reading about busted mounts, arms and even breaking the case open with too much torque. How have others fixed these problems from happening? I have seen stronger arms available. I am thinking of a bucket type mount that will hold the case and everything together and use stronger rubber (poly?) mounts. Is there anything available out there locally? Who is making these things?
mud4b wrote:this is what i done.. it works so far.
That looks pretty sweet, whats the deal with the rubber mount, have you found it vibrates alot like that ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Yeah thats pretty cool. Doesnt look too hard to achieve.
I like the e-brake setup with what looks like a Go-kart caliper.
I have just inquired about one of these - http://www.rock4xfabrication.com/forrest.htm
I like the e-brake setup with what looks like a Go-kart caliper.
I have just inquired about one of these - http://www.rock4xfabrication.com/forrest.htm
mud4b wrote:yes it did.
i now use normal mounts on the long arm with chains.
and the mount you see in the pic on the single arm.
these do have a crush tube inside them.
excellent
I am cataloging all this stuff away for one day when I get another Zuk, and I will build it with all my imaginary money, in an impossibly short time frame
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
mud4b wrote:yes it did.
i now use normal mounts on the long arm with chains.
and the mount you see in the pic on the single arm.
these do have a crush tube inside them.
the mount on the single arm? what is the rubber bit from and do you need high tension bolts?
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
ok the disc e-brake is made from go- kart gear.i have made it myself...
it will be a kit im just doing the testing on it.
i used boat rollers that have been cut down. it does use ht bolts.
it will be a kit im just doing the testing on it.
i used boat rollers that have been cut down. it does use ht bolts.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Who is online
Users browsing this forum: No registered users and 3 guests