I have a 3 inch lift 4 door Rangie. I want to put 33inch by 12.5inch by 15inch Mud Tyres on it most probably Mickey Thompson Radials. And I am wondering what offset I should get the rims at for a happy medium??
It looks pretty definate I will have to trim the front guards, do you think I will get away with the rear?
Also where would I find these Rims at a reasonable price??
Thanks..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Range Rover Aftermarket Rims Offsets 15 or 16inch
Moderator: Micka
Range Rover Aftermarket Rims Offsets 15 or 16inch
Last edited by Suspension Stuff on Tue Mar 15, 2005 5:17 pm, edited 1 time in total.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
get 15x8 with 100mm offset 
In regards to the trimming - depends on your lift.... you say you have 3" total is this any body lift or all spring lift ? ? ?
If you have a body lift you will get away without triming the guards but I sugest you get the grinder out and remove the ends of the bolts that protude into the top of your front wheel wells, and also remove the bolt that sits behing the lip in the centre of your rear arches (where the door ends) its safe to be removed otherwise it may stab into your sidewall under heavy articulation
If you have no body lift you will need to trim the guards but only very minimal
In regards to the trimming - depends on your lift.... you say you have 3" total is this any body lift or all spring lift ? ? ?
If you have a body lift you will get away without triming the guards but I sugest you get the grinder out and remove the ends of the bolts that protude into the top of your front wheel wells, and also remove the bolt that sits behing the lip in the centre of your rear arches (where the door ends) its safe to be removed otherwise it may stab into your sidewall under heavy articulation
If you have no body lift you will need to trim the guards but only very minimal
Thanks guys, sounds like 100mm offset is the go. The 3 inch is spring lift only.
David do you have 11.5 by 33 inch tyres and do you have any leads on where to find these rims at a reasonable price?? . What kind of flares do you prefer?? Thanks again from Shane
David do you have 11.5 by 33 inch tyres and do you have any leads on where to find these rims at a reasonable price?? . What kind of flares do you prefer?? Thanks again from Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
I have 35x10.5x16 so they fit well on 16x7 rims.
I'm sure there would be plenty of 33's that would fit on 7inch rims.
Eastern Wheel Works made my wheels, they're located down towards Phillip Island somewhere.
They're good value, and very strong, but usually take a few weeks to get made.
I've used the rubber flare kits from TJM which screw in from the side.
I'm sure there would be plenty of 33's that would fit on 7inch rims.
Eastern Wheel Works made my wheels, they're located down towards Phillip Island somewhere.
They're good value, and very strong, but usually take a few weeks to get made.
I've used the rubber flare kits from TJM which screw in from the side.
Anyone else agrees or disagrees or just have something different that works, Thanks
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Who is online
Users browsing this forum: No registered users and 1 guest