Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Build a tuff truck in 3 weeks

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Build a tuff truck in 3 weeks

Post by SAWZALL »

Well, now that I am officially in tuff truck I suppose I (We) should build one. I wanna have it on the road in three weeks so that I can have a few weeks to iron out any bugs...Oh and get in some practice too.

The plan is to spend this week doing what I can at home and then towing it to Overkill for the remaining two weeks to finish it....well that is the plan

I only have to:
Extend w/base
Replace diffs
SAS
roll cage
twin transfer
Protection
winch mount
flares


Yesterday I cut the back off it and today did some work on the rear "tray". Tommorow, Im off to the bank for a loan.

Pics to come...Once I figure how to shrink them

Any Newy guys interested in a working bee....
Gone drag racing......
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

good luck make sure to post pics of the buildup
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

good luck

so you are going the twin transfer now, what changed ya mind?
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

4.1 diff gears :?
Gone drag racing......
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

ah ok, so you going a setup like the kicker3, or a dodgy version like me :D :P
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Neither, quality OVERKILL conversion....
Gone drag racing......
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

cool another ute thats original :lol: :armsup: :lol:
will the tray be made out of aluminum foil to save on weight? :D
P.E.T.A
People eating tasty animals.
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Re: Build a tuff truck in 3 weeks

Post by Drewfus »

SAWZALL wrote:
Pics to come...Once I figure how to shrink them

Any Newy guys interested in a working bee....


You have PM.

Cheers,

Drewfus
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 1732
Joined: Sun Jan 19, 2003 6:12 am
Location: Roof, side, end, sometimes wheels

Post by ljxtreem »

Extend w/base, roll cage
all this stuff going to be engineerd :?:

Mock
My photographic Art http://www.redbubble.com/people/ljxtreem

www.dirtcomp.com.au

Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Re: Build a tuff truck in 3 weeks

Post by HRZOOK »

SAWZALL wrote:Any Newy guys interested in a working bee....


Where do ya live?

HR
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

twin transfers or http://www.klunev.com/samurai_cover_page.htm
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i'll come round sometime with the boys if ya having a working bee... i can hold stuff for ya :D got no skills tho... :lol:


oh, and pics!!!!!!!!! :armsup:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

yeah chuck gimme a call mate if u want a hand
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

ljxtreem wrote:Extend w/base, roll cage
all this stuff going to be engineerd :?:

Mock


Cant see a problem with those mods...

Thanx for all the offers (both here and PM)

Today pulled the dash out and removed some unwanted weight. Started on front spring mounts and did some more to the rear end

Id much prefer to replace the transfer with a Sierra one but I dont know whether I can get the gearing low enough....
Gone drag racing......
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

id give u a hand but mine aint dun yet :finger:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I desperately need a tall thin spare to finish the tray...anyone...
Gone drag racing......
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

if your using tors you could always use a 750 split rim they look gay but i think there a 33" tyre
P.E.T.A
People eating tasty animals.
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

How wide and do you have one?
Gone drag racing......
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

jake lawson wrote:if your using tors you could always use a 750 split rim they look gay but i think there a 33" tyre



don't tempt him he'll do it actually might be tooo heavy :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

Post by ZOOK60 »

dont have one but i think there 7.5 wide
P.E.T.A
People eating tasty animals.
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Sounds perfect. Anyone know a source
Gone drag racing......
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Go to a tyre shop. this size is most common on light trucks (front), and i believe hilux or cruiser run them standard?

If you want larger get some 825 truck tyres. I fitted some to my zook a year ago and it looked super Grimace! :?
[url]www.twinstickoffroad.com[/url]
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

SAWZALL wrote:Sounds perfect. Anyone know a source


I chucked[pardon the pun] 2 out 2 weeks ago, council clean up :cry:

they are 5.5 inches wide
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

I have an old split rim, and a normal rim (early landcruiser) both have 750 tyres on (I think will have to confirm), similarly, will need to check how much tyre is left on em.

If your interested in them, and after I reconfirm what they are, your welcome to take them.

PM me if your interested and we'll go from there.

Cheers,

Drewfus
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Update: Diffs arrived earlier in the week, thanx turbo4t.

Rear diff mounts are done. Front diff mounts were going to be done on Sat but were off to WERock later today. Havent really got as much done as I was hoping....

I'll hassle SAM re pics....
Gone drag racing......
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Update: Rear suspension is done and car is sitting on 37's :cool:

Doing the divorced transfer at the moment.

Desperately need a Sierra jackshaft....anyone help a brother out????
Gone drag racing......
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i have a coily transfer jack shaft chuck


thou it is longer, wont help :?:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

Contact:
Contact toysuzi

sawzall

Post by toysuzi »

good to hear its coming together

bring on the pics :armsup:

one photo can say a thousand words ;)

daryl
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

RB zook wrote:i have a coily transfer jack shaft chuck


thou it is longer, wont help :?:


Length isn't a problem...that's what I tell the ladies.....are you on your way yet??????
Gone drag racing......
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

pics chuck PICS!!!!!!!!!!!!!!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 64 guests