Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lock Up Torque Converers

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Lock Up Torque Converers

Post by outlandy »

Does anyone know about these wonderfull things and how to modify my 60 series to stop it locking up when I dont want it too. I know it is quite a simple mod on same year patrols but I cant get any info on Cruisers.
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

get your hands on the electrical diagram and put a switch in the wire
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Post by outlandy »

Where do I get a copy of the electrical diagram? My Gregorys book has detailed schematics but nothing that goes down to the gearbox level.
Top
Posts: 158
Joined: Tue Mar 23, 2004 9:48 pm
Location: Cairns, FNQ

Post by Mick_n_Sal »

What year is your 60 - I just looked in my Factory 60 / 70 service manual but it doesn't include mention of Lock-Up torque converter. My manual may be too early for it.

Mick_n_Sal
HIS: '90 FJ73 Awaiting funds for mods
OURS: '00 HZ105 Cruiser - HIDs, GPS, UHF, LF240s, BFG MTs, BB, Steps, Outback Drawers . . . .
Top
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Post by outlandy »

My 60 is actually a 62 and is a 89 model and has 4 speed auto plus lock up in fourth. I need to stop it doing it for towing and hilly terrain ;)
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

outlandy wrote:My 60 is actually a 62 and is a 89 model and has 4 speed auto plus lock up in fourth. I need to stop it doing it for towing and hilly terrain ;)

put your foot down on the go pedal and it will not lock :D
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

by unlocking your torque converter while carrying a big load you will build alot of heat which destroys auto's

alot of the heat comes from the torque converter when it not locked up

alot of people get a switch to lock it up while in third etc
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest