Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

honest 4x4 wrecker in melbourne

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

honest 4x4 wrecker in melbourne

Post by Gibonator »

after a good 4x4 wrecker, not one thats good and driving and wrecking but actually selling 4x4 parts
FJ 73, army green ,snorkel, high mount, dual bats,draws,
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

there is one decent one I know of, all 4wd I think its called..

btw, no such thing as an "honest wrecker".. they are all dodgy :D
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

what wrecker you should use will depend on what type of 4x4 you need parts for. some have a standard parts price where say a g'box from a patrol is the same cost as one from a feroza. Others price according to demand or the first figure that pops into their head.

best to just ring arround for best price.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

robbie wrote: no such thing as an "honest wrecker".. they are all dodgy :D



I beg to differ.....

I have recently "discovered" a new wrecker that has been around for a while but unknown to me.
Whats really embarrasing is he's retivilly local too ( 1.5 hour drive is close for me )

I have found this guy to be brilliant in his pricing, his warantee, his speed of delivery, and his honesty.

The thing that supprised me the most is that he does 90% of his buisiness over the phone and is one of the bigger wreckers in Vic and sells more interstate than in Vic !!!

He does mainly cars ( late models ) BUT.... has a large range of 4x4 stuff onhand and its growing steadily. I was there last week and counted 8 troop carriers, 5 Mitsubishis, a dozen patrols, and probably 6 luxes....

Stuff I've bought of recent.....

4 alloy mags to suit a commodore ( 5 spoke ) with about 75% rubber left on the Michy tyres cost me .....$88 !!!! THE LOT ! ( 15X8 inch rims !! )

1 Commodore diff ( 10 bolt Salsbury ) 3.23 centre & drum to drum cost me .... $125 ( currently being converted to disc brake)

1 Commodore tailshaft with new centre bearing cost ...$ 44

1 Nissan PTO winch ( to suit MQ/MK ) complete kit cost ....$400

1 three core radiator in "new condition" to suit V8 commodore, cost $50 :shock: ( I was about to spend $400 on a recored unit )

Give "Jamie Nunn" a ring on.....
03 53 321 721
or web:
www.centralmotorwreckers.com.au

he is situated @....
836 HUMFFRAY ST.,
BALLARAT

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Thats a pretty good PLUG are there any benifits here? :D
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

None what so ever.....

well worth the phonecall and if in doubt try the web addy

I've been dealing with wreckers for near on 25 years now and this guy is awsome ....I'm just sharing the knowledge and hopefully others will benifit too.


Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
msh
Posts: 66
Joined: Sat Mar 05, 2005 12:08 am
Location: Melbourne

Post by msh »

Try Hall 4x4 Salvage, they're my preferred wrecker. Got a mq rear window hinge off em, nearly half the price of every where else, when I got there they threw in a second one for free, and gave me two beers as well. And they let me get a change over alt on tick. Didn't get the old one to em for about 2 weeks and they were cool with it. Top blokes, good service.
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

just a tip, deal with the same person each time, this way you'll get better service than dealing with different people behind the counter
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 88
Joined: Tue Nov 23, 2004 10:57 am
Location: melbourne

Post by bradley »

V8Patrol wrote:None what so ever.....

well worth the phonecall and if in doubt try the web addy

I've been dealing with wreckers for near on 25 years now and this guy is awsome ....I'm just sharing the knowledge and hopefully others will benifit too.


Kingy


Ill back that, rang em for a price on jackaroo rims, elsewhere $250 ea, central - $50-55 straight up, good to talk to as well. Think i found my new wrecker. Thanks Mate ;)
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

What vehicle?

These guys have come good for me a couple of times

Halls 4x4 Salvage
1 Barry St
Bayswater
9729 7566

Tojos & Nissans
www.3rdrock4x4.com
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

scotto wrote:What vehicle?

These guys have come good for me a couple of times

Halls 4x4 Salvage
1 Barry St
Bayswater
9729 7566

Tojos & Nissans


I'll back that Halls Rock!!

- Also - I rang central - they aren't Cheap for Yota. $220 for a tailshaft - smae price form Halls a week ago. less travel as well...
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

Halls the way to go,

they didnt have any free wheel hubs left, so he went and took one of his own car for me
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

YankeeDave wrote:Halls the way to go,

they didnt have any free wheel hubs left, so he went and took one of his own car for me


OK...... What was his angle here?
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Hybrid wrote:
YankeeDave wrote:Halls the way to go,

they didnt have any free wheel hubs left, so he went and took one of his own car for me


OK...... What was his angle here?


I have seen how he drives so that dosent mean it is in good nick. Only person I know that could smash a rock in half the size of a bus (ateco winch challenge 99)

But I have brought stuff from Halls before and have been very happy with the price. And would go back there. But I will try this one that V8patrol has brought up cos they are closer.
THOUGHT FOR THE DAY....
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

much respect for EKW in brooklyn, melb.

They do mostly jap import stuff, but i`ve recently just got a bar and winch for my patrol
User avatar
ash
Posts: 103
Joined: Sun Oct 03, 2004 8:57 pm

Post by ash »

southern 4x4 in campbelfield there pretty good
Posts: 23
Joined: Wed Jan 05, 2005 12:18 am
Location: melbourne

Post by bunter »

HALL 4X4
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

when it comes to buying second hand parts from wreckers nothing beats the good ol phone around.......
Posts: 194
Joined: Wed May 04, 2005 9:06 pm
Location: south coast n.s.w.

Post by croozy »

GIVE SOMERVILLE AGO. THEY DID GOOD BY ME & I'D USE THEM A GAIN IF NEEDED. THEY'RE IN DANDI I THINK
it's never a problem until it can't be fixed, even then it' only a minor set back
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

Somerville wreckers is in Somerville......
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

80diesel4play wrote:
scotto wrote:What vehicle?

These guys have come good for me a couple of times

Halls 4x4 Salvage
1 Barry St
Bayswater
9729 7566

Tojos & Nissans


I'll back that Halls Rock!!

- Also - I rang central - they aren't Cheap for Yota. $220 for a tailshaft - smae price form Halls a week ago. less travel as well...


I had to get some front shackles, and Hall were the best price. They were $20 cheaper for each, and that was new also. So I'd give them a go again for sure.

Mere
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

HALLS. Top bussiness blokes and top blokes outa work and comps and mud runs and things.
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

Camshaft1 wrote:HALLS. Top bussiness blokes and top blokes outa work and comps and mud runs and things.


I'll second that and third that - they are Good value to deal with and if they don't have it - they'll point you in the right direction and not a bum steer.
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Posts: 70
Joined: Sun Aug 08, 2004 2:51 pm
Location: Melbourne

Post by alrob »

got me a V good condition rear 4.5 diff for $440, and a transfer case for $195 from halls. they definately try to get ya the best, as the diff (to go in rear) was formerly a front, meaning it had done less work, and the transfer case was out of an ln106, a later model hilux, but same case, just againb, done less work. chucked in a gasket for the diff and a sunnie 15x7 too for free. when i left me reciept there, and went back 2 weeks later in a hope of getting a new one - they had actually kept it!

an indication on price, a quote for the transfer case from another mob was at around $450.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests