Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Add turbo to my 2L or buy a used 2LT

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Add turbo to my 2L or buy a used 2LT

Post by gogo »

My present 2L engine has done 550k and is a bit sluggish. I am now considering whether to rebuild my 2L and add a turbo and intercooler or just buy a used 2LT and be done with it. I heard fitting a turbo to my 2L is not really feesible as the 2L will die rather quickly. Fitting another type of engine is not possible.

What do you guys think.
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

mate i wood go a 2LT with that many kms on the little 2L :D
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

Well OK, but my 2L is actually ok and I dont mind to rebuild it despite its km.

My question is it practicle to fit a turbo onto it or should I just go for a 2LT whose km will be relatively unknown. When I mean practicle will I damage the engine in the long run? Meaning compression ratio's etc.
Posts: 227
Joined: Mon Sep 20, 2004 8:05 pm
Location: the vegas

Post by benno_from_brizvegas »

I believe the 2LT has a stronger bottom end that makes it more suitable for forced induction.

Hopefully someone else can chime in with details.

Benno
Posts: 20
Joined: Tue Jan 04, 2005 7:47 pm
Location: melbourne south eastern suburbs

Post by beentherewreckedthat2005 »

put a v8 in it
the only way to go
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

V8 is a good idea. However my road tax will ber sky high in the country I am. Thats why have to stay with a 2.5litre.
Posts: 461
Joined: Thu Jan 01, 2004 7:23 pm
Location: Kuala Lumpur, Malaysia

Post by BabyGodzillaGTi-R »

1JZ.......
GoToy i presume?
My RIG sucks big time.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

the bottom end in the 2L-T is stronger (same as a 3L) and much better for taking the boost, the turbo pistons are also heavier and have thicker crowns and skirts to deal with the extra heat. turboing and rebuilding the 2L will cost a LOT more than getting a decent, low mileage 2L-T import.

where are you?
Last edited by dumbdunce on Tue Mar 29, 2005 1:25 pm, edited 1 time in total.
Free air locker to the first 20 callers!
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

Hi babygod!!

Advice is go straight for 2LT as I thought.

Thanks for the advice guys.
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

Hi dumbdunce,

I am working in Malaysia. I have to stick with a 2.5 cos if I go any higher the road tax will drastically increase.

Alot of 2LT here, but most of them from taxi's.
Banned
Posts: 87
Joined: Mon Dec 13, 2004 10:23 pm
Location: Gold Coast

Post by thebrunks »

neither, go a 3L & enjoy the benfits!

A 3L will outlast a turbo 2.4 (2l or 2L-T) by a country mile as well as handle a turbo with no probs!

I'd have a NA 3L (2.8Litre) over a turbo 2L-T any day!

the 2L & 2LT have a pretty weak head as compared to a 3L.

Russ
Want to try circuit racing, see www.racecarleasing.com.au
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

thebrunks wrote:neither, go a 3L & enjoy the benfits!

A 3L will outlast a turbo 2.4 (2l or 2L-T) by a country mile as well as handle a turbo with no probs!

I'd have a NA 3L (2.8Litre) over a turbo 2L-T any day!

the 2L & 2LT have a pretty weak head as compared to a 3L.

Russ


did you read the thread? there are good reasons why he has to stick with sub 2.5 litre. the late 2L-T (1990-) has a near identical head to the 3L, but agreed the earlier 2L-T heads have problems with cracking, breaking valves and dropping valve seats and precombustion chamber fragments.
Free air locker to the first 20 callers!
Posts: 79
Joined: Sat Mar 26, 2005 10:55 pm

Post by gogo »

Does anyone know where I can find the engine numbers for the 2LT series engine? I don't wish to end up one of those older engines.
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests